(Type 84)Smart Industrial IoT Wireless Vibration Temperature Sensor 2024 version

Industrial IoT Wireless Vibration Temperature Sensor V3

Introducing NCD’s Long Range Industrial IoT wireless vibration temperature sensor, boasting up to a 2 Mile range using a wireless mesh networking architecture. Incorporating a 16-bit Vibration and Temperature sensor, this sensor transmits highly accurate vibration data at user-defined intervals. This All in One Vibration sensors can send computed results thanks to inbuild FFT and also RAW data for further processing on the user end.

This vibration Temperature sensor is packed with features like Acceleration calculation, Velocity Calculation, Time Domain Data Analysis For FFT. User configurable Data aggregation interval l ranging from 1sec to 10sec.

This Industrial IoT wireless vibration sensor samples 3-axis of Vibration data for 900ms and then calculates RMS, Maximum, and Minimum vibration readings. This sensor combines these data with temperature data in a data packet, and transmits the result to modems and gateways within wireless range.  Once transmission is complete, the vibration sensor goes back to sleep, thus minimizing power consumption.

Powered by just 6 AA batteries and an operational lifetime of 500,000 wireless transmissions, a 10 years battery life can be expected depending on environmental conditions and the data transmission interval.  Optionally, this sensor may be externally powered, making it an ideal choice for wireless vibration monitoring system for industrial equipment.

With an open communication protocol, this sensor transmits hardware encrypted data that can be integrated with just about any control system or gateway.  Data can be transmitted to a PC, a Raspberry Pi, to Losant IoT cloud, Microsoft® Azure® IoT, and an embedded system all at the same time. Sensor parameters and wireless transmission settings can be changed using our free LabVIEW® monitoring software on a desktop PC.

The long range, price, accuracy, battery life and security features of Wireless Vibration Sensor makes it an affordable choice which exceeds the requirements for most of the industrial as well as consumer market applications.

General Vibration Guidelines

Here are some recommended Vibration standards, you can compare these readings with our Long Range IoT Wireless Vibration Temperature Sensor to determine if your device is operating properly or if it may require service (note that actual equipment and application may vary):

A. 0.01g or Less — Excellent condition, No action required

B. 0.35g or less — Good Condition, No action required unless the machine is noisy or running at abnormal temperature

C. 0.5g or less — Fair Condition, No action required unless the machine is noisy or running at abnormal temperature

D. 0.75g or More— Rough Condition, possible action required if machine is noisy and also check the bearing temperature

E. 1g or More  — Very Rough Conditions, further analysis and see if its doing this continuously. Also check for noise and temperature

F. 1.5g or More — Danger Level, there is definitely a problem in the machine or installation. Also check the temperature Log

G. 2.5g or More — Shut-down the Machine immediately and look for possible causes. Call a technician for immediate repair

For Heavy Machinery these readings could be 1.5 times to 2 times more than listed above.

Transmission Interval

This device sends data periodically, based on user-preset timing intervals.

Vibration Sensor Monitoring Applications

• Ideal for Wireless Vibration Measurement of Motors, Pumps, Compressors
• Wireless Industrial Vibration of Robotic Equipment, Conveyors, and Transport Vehicles
• Machine Health Monitoring for a Predicative Maintenance System
• Future Fail Detection for Industrial Machines
• Vibration Monitoring of Conduits, Pipes, and Air Passages
• Vibration and Temperature Monitoring for AWS, Azure, and Losant

Industrial Wireless Vibration Monitor vs Long Range IoT Vibration Monitor

We realize that the Industrial Wireless version and the Long Range IoT version seem very similar and in fact are. The Industrial Wireless line has a few improvements over its counterpart in the Long Range Wireless line in form and fit, but maintain the same function.  Industrial Wireless versions may have a longer battery life, optional off-board sensors, more accurate readings, and other frequency ranges.