IoT Long Range Wireless 24V AC/DC Voltage Detection Sensor
Please note that images above may contain product not included with purchase.
Highlights
- Industrial Long Range Wireless Voltage to Push Notification
- One 0-24V Optically Isolated AC/DC Input Channel
- 2 Mile Line-of-Sight Range with On-Board Antenna
- Superior LOS Range of up to 28 Miles with High-Gain Antennas
- Interface to Raspberry Pi, Microsoft® Azure®, Losant and More
- Example Software for Visual Studio and LabVIEW®
- Wireless Mesh Networking using DigiMesh®
- Open Communication Protocol for Easy Software Integration
- Small 3″ x 3″ Form Factor Wireless Push Notification
- Power-Efficient Sleep Mode, Up to 10 Year Battery Life
- User Configurable Sleep duration
- Up to 500,000 Transmissions from 2 AA Batteries
- Includes Battery Level with Every Transmission
- Validates and Retries Lost Communication Packets
IoT Long Range Wireless 24V AC/DC Voltage Detection Sensor
NCD IoT Wireless 24V AC/DC Voltage Detection sensor transmitters makes it easy to receive alerts when the voltage is preset or wet contact is detected. This IoT long range wireless 24V AC/DC Detect sensor transmitter includes One Optically isolated Voltage input. This input can be used to detect both AC or DC inputs. The input voltage range is 0-24V, sending a transmission if any state of the inputs change. Receive an alert when voltage is detected, receive another alert when the voltage is lost. This IoT long range wireless 24V AC/DC Voltage Detection sensor is ideally used in security applications that need a reliable long-range wireless wet contact transmission. Powered by two AA batteries, users can expect up to 500,000 transmissions or up to 10 years of battery life depending on environmental conditions and the transmission interval required for your application. Optionally, this sensor may be externally powered. This Voltage Detection transmitter will send wireless push notifications over a distance of up to 2 miles using the included antennas (line of sight) or up to 28 miles using high-gain antennas. This wireless push notification transmitter works by sending data as soon as it detects an voltage (any change on input). Additionally, this 24V AC/DC Detect sensor transmitter will send periodic data, indicating the input status as well as the battery level, just to let you know it’s alive and well.
Note: This is a Voltage detection device not a voltage meter. It will send “On” output when the voltage is between 2.5-24V AC/DC and will send “Off” output when voltage is between 0-2.5V.
Transmission Interval
This device sends data periodically, based on user-preset timing intervals.
This device sends data when a on/off state change of the input is detected.
Applications
- Wireless Wet Contact Detection
- AC/DC power presence detection
- HVAC Automation
- Machine On/Off State Detection
Mechanical Drawing
Wiring Diagrams
Essential
Documentation Downloads
Community Repositories
Enterprise 868 MHz Sensors
Enterprise 900MHz Sensors
Max Error Rate — =/-2%FS
Not for use in outdoor applications or for use in excessive temperature conditions. Prolonged freezing will prevent batteries from functioning until thawed, using extended temperature range industrial batteries may improve the useful temperature range. Extended freezing applications should use a full-time powered solution. Prolonged exposure to extreme humidity conditions may damage this device. Exposure to high temperatures may cause the batteries to leak, causing permanent damage to this device. NCD Warranty does not cover battery corrosion or use in excessively smoky environments under any circumstances.
900HP-S3B Wireless Compatibility Notes
Notice: Compatibility Notes Does NOT Apply to the Following Products:
- NCD Enterprise Solutions
- NCD Wireless Sensors
- NCD Enterprise Modems and Gateways
Notice: Compatibility Notes Applies to NCD Industrial Products, Including Fusion, ProXR, ProXR Lite, Taralist, and Reactor Series Products.
Compatibility Notes
When using an 900HP-S3B communication module, it is essential that you use the ZIGMO_PCB to configure the module settings. Long-Range wireless sensors may be programmed over the air without removing the communications module.
A 900HP-S3B Modem or a gateway of some kind that support the 900HP-S3B communications module will also be required.