You are using an unsupported browser!

Please upgrade your version of IE to at least 9, or use a modern browser such as Chrome or Firefox.

Features

  • Industrial Grade Wireless AC Voltage Sensor (RMS output)
  • 24-bit Output with a Voltage Range of 0-120VAC
  • Auto Time Delay Based Data Sample Transmission
  • User-Configured Voltage Change Detection
  • Configurable Voltage Change Detection Limits
  • Configurable Voltage Sensor Calibration Over Wireless Link
  • 2 Mile Line-of-Sight Range with On-Board Antenna
  • Superior LOS Range of up to 28 Miles with High-Gain Antennas
  • Interface to Raspberry Pi, Microsoft® Azure®, Losant and More
  • Example Software for Visual Studio and LabVIEW®
  • Wireless Mesh Networking using DigiMesh®
  • Open Communication Protocol for Easy Software Integration
  • Small 3″ x 3″ Form Factor Wireless AC Voltage Meter
  • Power-Efficient Sleep Mode, Up to 10 Year Battery Life
    • User Configurable Sleep duration
    • Up to 500,000 Transmissions from 2 AA Batteries
  • Includes Battery Level with Every Transmission
  • Validates and Retries Lost Communication Packets

$179.95

SKU: PR52-13 UPC: 689860069947 Categories: , ,

Description

IoT Long Range Wireless AC Voltage Monitor Sensor

Our long range wireless enterprise series sensors are an easy to use and reliable start to any data aggregation application. This video will demonstrate how they work, what they do, and how to use them.

IoT Long Range Wireless AC Voltage Monitor Sensor

Introducing NCD’s Long Range IoT Wireless AC Voltage Monitor Sensor, boasting up to a 2 Mile range using a wireless mesh networking architecture. It works together with a 120VAC transformer (used as a sensor) and samples voltage at a high data rates, calculating the RMS voltage value. This process is repeated at user defined intervals while sleeping in between samples to minimize power consumption.

This product has an additional feature of detecting change in voltage at user defined detection time intervals and sending out data if the voltage change is greater than user defined detection change percentage. This change detection feature can be enabled or disabled by user. To minimize power consumption, it sleeps during the time it is not checking for change. Both of these features work in parallel to support multiple application areas in one package.

Powered by just 2 AA batteries and an operational lifetime of 500,000 wireless transmissions, a 10 year battery life can be expected depending on environmental conditions and the data transmission interval. Optionally, this sensor may be externally powered.

IoT Security

We take IoT security very seriously, which is why we encrypt every IoT sensor, gateway, modem, and device in the NCD Enterprise product line.  Encryption is much easier to manage than you might expect, as the encryption does not get in the way of using the device.  We include a standard 128-Bit AES Encryption key with every device or we can help you integrate a new encryption key into all of your devices.  All hardware devices must use the same encryption key.  Once the keys are set, the hardware manages the rest for you, 100% in the background. 

Wireless Range and Protocol

NCD long-range wireless IoT sensors use the DigiMesh® protocol from Digi.com.  DigiMesh® was designed by THE industrial leader in secure wireless communications for industrial applications.  DigiMesh® automatically hops data from gateway to gateway until it arrives at the desired destination.  NCD IoT sensors are capable of a 2-Mile line-of-site communication distance with the included antennas and up to 28-mile range when using high-gain antennas.    

Your IoT Sensor Data Belongs to You!

Your data belongs to YOU and it’s up to you to decide where you want your IoT sensor data to arrive.  Don’t be bogged down by the limitations of proprietary cloud solutions, post the data where you need it most.  We offer an open communications protocol so you can integrate NCD wireless transmitters into your own software.  This allows integration of NCD IoT sensors into any control system or gateway you could ever imagine.  Send data to a PC, Mac, or Linux computer, or a Raspberry Pi using NCD modems.  Send data to popular cloud platforms such as Microsoft® Azure® IoT, Losant, and MQTT using NCD Micro Gateways.  We can also help get data from NCD wireless IoT sensors to embedded platforms such as Arduino.  We also offer sample code for Microsoft® Visual Studio, Node-RED, LabVIEW®, and Python.  Our documentation fully breaks down the packet structure, so integration into other languages is possible.  We may even be able to help, so please feel free to contact us if you are working with a platform not mentioned here.

The long range, price, accuracy, battery life and security features of Long Range IoT Wireless AC Voltage sensor makes it an affordable choice which exceeds the requirements for most of the industrial as well as consumer market applications. This IoT Wireless AC Voltage Monitor Sensor can be used in predictive maintenance system or as a power failure detection device.

Transmission Interval

This device sends data periodically, based on user-preset timing intervals.
This device sends data when input thresholds exceed user-defined preset limits.

Sensor Data Overview

NCD IoT Sensors send a lot more than just sensor data.  For instance, a unique serial number is sent so you can always identify a particular sensor on the network.  A Node ID is also included, which a single byte of data that you can use for anything, such as the floor of a building or to help identify which group a sensor belongs to.  Also included in the data packet is a firmware version, battery level, and sensor type.  This allows your software to positively identify and manage the health of NCD IoT wireless sensors.  While signal strength data is also available, it is handled in a different way, and is not included in the sensor data packet (but rest assured, signal strength data for each sensor is available).  Please see the Resources tab to see detailed information on the data structure of this device.  

Good to know...

NCD wireless sensors transmit data and require a receiver.  There are many options available for receiving data from NCD IoT devices, which will be discussed in much greater detail below. We highly recommend at least one USB Modem for the purposes of sensor configuration (available during checkout). Also, our LabVIEW software is typically used for advanced sensor configuration, which is located in the "Resources" tab above.

How long Will the Batteries really Last?

Most NCD IoT Sensors are rated for 300,000 to 500,000 transmissions until the batteries become so weak they are unreliable.  You could spread these transmissions out over a 10 year period and send 50,000 transmissions per year.  This would allow up to 136 transmissions per day, or about 5 transmissions per hour (for a 500K sensor, or 3 per hour for 300K sensor).  If you only need the batteries to last 3 years, you could send 166,666 transmissions per year, or about 456 transmissions per day (about 19 transmissions per hour for a 500K sensor).  As you can see, battery life is really up to you.  By altering advanced settings in the NCD IoT sensor, you have control over longevity.  Please note the 500,000 transmission rating is for premium alkaline batteries.  NCD ships all sensors with premium Lithium batteries, which include a ultra-wide temperature range that typically lasts in excess of 600,000 transmissions for some sensor types.  These batteries weigh less than half of alkalines, and they work in the freezer!  A word of caution though, putting a sensor in configuration mode will drain the batteries very quickly.  It’s important to configure your sensors and exit configuration mode as soon as possible or use a external power supply during configuration (if supported by the sensor).  The table below indicates how many Transmissions Per Hour (TPH) your can expect from different sensors over a lifespan of up to 10 years.

Battery Life:3 Months6 Months1 Year2 Years3 Years5 Years10 Years
300K Sensor136 TPH68 TPH34 TPH17 TPH11 TPH6 TPH3 TPH
400K Sensor180 TPH90 TPH45 TPH22 TPH15 TPH9 TPH4 TPH
500K Sensor228 TPH114 TPH57 TPH28 TPH19 TPH11 TPH5 TPH
600K Sensor272 TPH136 TPH68 TPH34 TPH22 TPH13 TPH6 TPH

TPH = Transmissions per Hour

The Truth About Battery Life

Under the best of circumstances, the best non-rechargeable batteries commonly available today are limited to a 10 year non-working shelf life in a room temperature environment. Factors such as actual usage, temperature, and humidity will impact the working life. Be wary of any battery claims in excess of 10 years, as this would only apply to the most exotic and expensive batteries that are not commonly available. Also note that most battery chemistries are not rated for use in extreme temperatures. NCD only uses the best Non-Rechargeable Lithium batteries available today, which are also rated for use in extreme temperatures and have been tested by our customers in light radioactive environments. Lithium batteries offer a 10 year maximum expected shelf life due to limitations of battery technology. NCD will never rate sensor life beyond the rated shelf life of the best batteries available today, which is currently 10 years.

How Do I Change Settings and Examine Raw Sensor Data?

Using our long-range USB wireless modem, users can expect easy operation over a virtual COM port at 115.2K baud.  Simply open the virtual COM port of the USB modem and watch data stream in.  Optionally, we offer a Wireless receiver that operates over Ethernet.  Data from NCD sensors will appear over TCP/IP on port 2101.  Simply open a TCP/IP socket, port 2101, to the IP address of the Ethernet modem and see your data stream in to your local area network.  We have developed LabVIEW® software for each sensor to change advance sensor settings using both Ethernet and USB modems.  Alpha Station also allows display of sensor readings as well as limited configuration (this feature is still in development).  Of course gateways are also available for sending data to popular cloud platforms such as Amazon® AWS® IoT, Microsoft® Azure® IoT, and Losant (more information below).  We take software samples seriously, so be sure to to check out the “Resources” tab to see code samples for Raspberry Pi, Visual Studio, LabVIEW®, Arduino, Python, and more.

 

What Frequency Do I Need?

During purchase, you will see three frequency options.  Not all options are legal for use in all areas, so it’s important to make the right selection during purchase.  We will build your product and accessories based on the options chosen.  Here, we will explain these options in much greater detail, but please check your local laws BEFORE purchase.

900MHz for North America (U.S., Canada, and Mexico)

If you are located in North America, the 900MHz Option will provide the longest range currently supported with the best penetration through walls, buildings, industrial equipment, and trees.  This option is also the best choice for long range applications.  The official Line of Sight rating for this option is 2 Miles with included antennas or 28 Miles with high-gain antennas.  We suggest contacting Digi.com for a high-gain antenna recommendation if required.  Please check your local laws before choosing this option.

868MHz for Europe Only

If you are located in Europe, the 868MHz Option is the only legal choice available at this time. This option offers better penetration through walls, builds, trees, and industrial equipment that 2.4GHz. The official line of site rating for this option is 14.5km using 2.1dBi antennas. Please check your local laws before choosing this option.

2.4Ghz for Worldwide Use (Except Europe)

The 2.4GHz option should be chosen if 900MHz and 868MHz are not legal for use in your country. Please note this particular module is NOT LEGAL for use in Europe, as it has a higher transmission power than is legally allowed at 2.4GHz. This option is certified for use in the United States, Japan, Australia, Brazil, and South Korea. Please check your local laws before choosing this option.

Not Sure?

If you are unsure of which sensor option to choose, please contact us.  We may be able to help determine which sensors are legal for use in your area.

wireless ac voltage monitor sensor

LabVIEW® software makes it easy to plot AC Voltage values over time and change advanced wireless sensor settings.

 

Applications

  • Industrial Wireless AC Voltage Monitoring
  • Pump, Motor,Generators Electrical Behavior Analysis
  • Power Failure Detection
  • Key component of predictive maintenance
  • AC Voltage Measurement for AWS® and Azure® Cloud Services

Where do I send my IoT Sensor Data?

Your Sensors...Your Data...

NCD IoT Sensor Data can be sent anywhere with NO FEES OR HIDDEN COSTS, NOT NOW, NOT EVER!  NCD IoT Sensors always provide an open protocol, so you are not tied to any cloud platform.  You own your data, so you can do whatever you want with it, no subscriptions, no service contracts, and you can integrate NCD sensors into any software, embedded system, or cloud platform of your own free choice.

Send IoT Sensor Data Anywhere. Send IoT Sensor Data EVERYWHERE!

Whether you need IoT sensor data on a desktop computer, an IoT cloud platform, or an embedded platform, we have you covered.  NCD IoT sensors broadcast data, so data handling is very easy, expandable, and versatile.  Send IoT sensor data to Gateways when you want to talk directly to IoT cloud platforms.  Send IoT Sensor data to Modems when you want to talk to local computers.  Of course you can always send data to both gateways and modems simultaneously, so you always have access to your sensor data locally and remotely.  Use multiple Gateways when you need data redundancy or if you need to send sensor data to multiple IoT cloud platforms.

Organize Your IoT Sensors for Large Installations

IoT Sensor Clusters are also possible.  You can build a cluster of IoT sensors on every floor of a high-rise building, sending data to gateways and modems on each floor.  Clustering makes it possible to keep your IoT sensor data separated for easier management.  Each Gateway and Modem can be configured to listen to a different cluster of IoT sensors.  Because NCD devices support thousands of clusters, expanding your IoT sensor network is virtually limitless.

Do I Need a Modem or a Gateway?

IoT Sensor Gateways are used to translate data from sensors into human-readable values and post the results on common cloud platforms such as Amazon, Azure, Losant, and MQTT using WiFi for communications.  Modems on the other hand are used to transfer raw sensor data into different communication formats such as WiFi, Bluetooth, USB, RS-485, and MQTT.  Please note that a MQTT Gateway is different from a MQTT Modem.  A MQTT Gateway is preferred for most users, as it handles sensor translation for you.  MQTT Modems do not translate data, they send the raw sensor data to the MQTT broker for parsing on the server.  Learn More about the Difference Between Gateways and Modems Here:

Send IoT Sensor Data to Kosmos by Temboo!

Temboo is an official partner of National Control Devices, and we have thoroughly reviewed their support and integration of our sensors into their cloud platform.
 
Kosmos was designed with a built-in integration with NCD’s sensors which means that you can quickly set up and deploy applications in minutes – no coding required. It’s the easiest way to implement Industrial IoT applications at any scale on a single platform.
Temboo is an Official Partner of National Control Devices

Send IoT Sensor Data to Ubidots!

Ubidots is an official partner of National Control Devices supporting the MQTT protocol.  Simply use the NCD MQTT Gateway to connect NCD sensors to Ubidots!  Ubidots makes it easy to create tiles for monitoring NCD IoT Sensors from anywhere in the world!  Ubidots supports an easy setup process, getting you connected and displaying IoT sensor data in just a few minutes.  Because MQTT is the supported architecture, no special hardware is required to connect to Ubidots.  
Ubidots Logo
Ubidots is an Official Partner of National Control Devices

Send IoT Sensor Data to Microsoft® Azure® IoT

Collect IoT Sensor Data up to Two Miles Away and send your data to Microsoft® Azure® using the NCD Micro Gateway for Connection to Azure.

The Micro Gateway for Microsoft® Azure® reports all incoming IoT sensor telemetry as real-world values to Microsoft® Azure® through the connected Device Twin, and/or Device to Cloud Messages.

Setup could not be easier.  The NCD Micro Gateway uses SoftAP and includes embedded web pages for configuration.  Simply connect your WiFi capable computer to the NCD Micro Gateway Access Point and the Configuration Pages will appear.  All you need is an Azure® Device Connection String to register this device to your Azure® account and a WiFi network with internet connectivity.

Send IoT Sensor Data to Losant

Collect IoT Sensor Data up to Two Miles Away and send your data to Losant using the NCD Micro Gateway.  Leverage the power of the Losant Flow Builder to build a stunning dashboard that displays graphs of sensor telemetry over time.

The NCD Micro Gateway for Losant automatically provisions the gateway on the Losant Cloud and registers all IoT sensors as children of the gateway.  Watch IoT Sensor data arrive on the Losant cloud with minimal setup time.

Setup could not be easier.  The NCD Micro Gateway uses SoftAP and includes embedded web pages for configuration.  Simply connect your WiFi capable computer to the NCD Micro Gateway Access Point and the Configuration Pages will appear.  All you need are Losant connection credentials (Application ID and Application Token) and a WiFi network with internet connectivity.

Losant is an Official Partner of National Control Devices, Learn More about Losant Here.

Send IoT Sensor Data to Amazon® AWS® IoT

Collect IoT Sensor Data up to Two Miles Away and send your data to Amazon® AWS® IoT using the NCD Micro Gateway for Amazon AWS.  Leverage the power of the Amazon® AWS® IoT to connect to the complete ecosystem of NCD IoT Wireless Sensors.  The NCD Micro Gateway for Amazon® AWS® automatically provisions the gateway on the Amazon® AWS® Cloud and registers all IoT sensors as children of the gateway.  Watch IoT Sensor data arrive on the Amazon® AWS® cloud with minimal setup time.  

Setup could not be easier.  The NCD Micro Gateway uses SoftAP and includes embedded web pages for configuration.  Simply connect your WiFi capable computer to the NCD Micro Gateway Access Point and the Configuration Pages will appear.  All you need are Amazon® AWS® connection credentials and a WiFi network with internet connectivity.

Send IoT Sensor Data to your MQTT Broker

Collect IoT Sensor Data up to Two Miles Away and send your data to your own MQTT broker using the NCD Micro Gateway for MQTT.  Build your own cloud using the complete ecosystem of NCD IoT Wireless Sensors.  The NCD Micro Gateway for MQTT sends JSON strings in human-readable values for easy integration into your own dedicated cloud applications.   Build your own MQTT Broker or use Ubidots for displaying tiles of NCD IoT Sensor Data in just a few minutes!

Setup could not be easier.  The NCD Micro Gateway uses SoftAP and includes embedded web pages for configuration.  Simply connect your WiFi capable computer to the NCD Micro Gateway Access Point and the Configuration Pages will appear.  All you need are MQTT credentials and a WiFi network with internet connectivity.

Ubidots Logo
Connect to Ubidots using the NCD MQTT Gateway!

Cellular Gateways on the Way!

You’ve been asking for Cellular Gateways and we’ve been listening!  We are currently finalizing development of our Cellular Gateways for Amazon AWS, Microsoft Azure, Losant, and MQTT.  We are planning for an October 10th Release of our New Cellular Gateways, providing a Secure Direct to Cloud connection to NCD sensors from anywhere cellular service is available.

Using Modems with NCD IoT Sensors

Modems are ideal for communicating to localized computers, servers, and embedded systems.  The main purpose of a modem is to convert data from Wireless Sensors and endNode controllers into standard hardware communication formats such as USB Virtual COM Port, Bluetooth Virtual COM Port, WiFi TCP, WiFi MQTT, Ethernet TCP, RS-232, and RS-485.  Multiple modems may be used simultaneously, so you are not limited to making a single choice.  Add more modems as needed to cover larger areas or explore other communication technologies.  Both Modems and Gateways offer long range wireless communications up to 2-Miles line-of-sight.  Modems and Gateways may also be used in a Wireless Mesh network to “Hop” data across the wireless network to cover longer distances.  Both Modems and Gateways may be grouped into separate networks on each floor of a high-rise building without interference between floors.

Send IoT Sensor Data to Visual Studio

We Developed Alpha Station using Visual Studio to demonstrate how IoT sensor data can be received and converted to real-world values.  Alpha Station allows you to view and set basic configuration settings of remote sensors up to 2 miles away.  Alpha Station supports our Wireless USB Modem, our Mega Modem, and our Wireless Ethernet Modem.  The source code and run-time application is available for download on our web site at https://ncd.io/alpha.

Send IoT Sensor Data to Node-RED

We Developed a complete set of Drivers for Node-RED, so you can build your own flows and dashboards to help get you connected.  Send NCD IoT sensor data to Node-RED and use flows to build logic operations to send alerts or turn things on or off.  Combining Node-RED with NCD IoT sensors gives you limitless power to monitor, control, and visualize data locally and remotely.

The Node-RED Flow Builder is powerful, allowing you to build complex graphs and dashboards in minutes.  Node-RED may also be used for advanced Gateway applications.  Send data to your favorite IoT Cloud service such as MQTT, Losant, Microsoft® Azure®, or Amazon® AWS®.  Since Node-RED runs on a local computer, a USB, RS-232, Ethernet or Mega Modem is required.

NCD Node-RED Libraries are always expanding, you can read about how to integrate our sensor into Node-RED Here.

Send IoT Sensor Data to LabVIEW®

Configure & Test IoT Sensors with LabVIEW®

We Developed a complete set of tutorials for working with NCD IoT Sensors using LabVIEW®.  Use LabVIEW® to configure advanced sensor settings or to graph incoming sensor data.  Monitor the battery level of remote sensors and watch sensor data flow over time.  We will be adding source code for LabVIEW® in the future, but for now, please contact us if you have a urgent need for source code.  Since LabVIEW® runs on a local computer, a USB, RS-232, Ethernet or Mega Modem is required.

Data Logging

Using our LabView software, data logging from a single sensor is also possible.  Simply run the software and watch the graph fill with data over time.  Export the data into comma delimited tables for use in Excel or into other data analysis tools.  Logging data from multiple sensors simultaneously is not supported at this time in our software, but can be accomplished using Losant or Azure web services.

Please check the “Resources” tab above for resources relevant to this product or Click Here to see all of our LabVIEW® resources.

IoT Security and Transparency Statement

All IoT Device Manufacturers should commit to IoT Security and Transparency. As a consumer, you have the right to a IoT Security and Transparency Statement BEFORE purchase, and we encourage all customers to demand this information from all IoT Manufacturers and Vendors.  In an effort to be fully transparent with our customers, we will always disclose the most important security related information at the bottom of each product page for all IoT Devices.  Under no circumstances does NCD use IoT devices to collect customer data, sensor readings, or other information without full disclosure.  As a matter of NCD IoT Security Policy, any IoT device that collects any form of data must be disclosed in the IoT Security and Transparency Statement.  Relevant Security Information pertaining to this particular device is Indicated Below:

  • This Device does not directly communicate to the internet
  • This Device requires a Gateway for communication to the internet
  • This Device Uses 128-Bit AES Encrypted Wireless Communications (Minimum)
  • This Device is Equipped with a Default AES Encryption Key Common to All NCD Wireless Sensors at the Time of Shipping
  • Users Have the Ability to Change the Default AES Encryption Key
  • This Device Requires Physical Access to Change the AES Encryption Key
  • This Device Does Not Have the Ability to Communicate to NCD Servers
  • Firmware Upgrades Require Physical Access to this Device by NCD Engineers ONLY
802.15.4 Module Wireless

900HP-S3B Industrial Wireless Mesh

Long-Range Wireless Mesh networking is our favorite of all wireless communication technologies.  This is the ONLY communications technology NCD recommends on the factory floor, operating at a safe 900MHz.  Mesh technology will hop data from one location to another to reach its intended destination, users do not need to do anything other than make sure wireless modules stay within hopping range of each other.  We use the Digi 900HP-S3B module in many of our products, as this is the best industry has to offer.  With a 2 mile range between modules and up to 8 hops, it is possible to cover 16 miles of wireless territory using this technology.  Using high-gain antennas, this module is capable of communicating to a remote module up to 28 miles away.  Please note that data hopping only works between live devices.  Data will not hop between sleeping sensors.  Data will hop from sensors to gateways and modems.  Data will also hop between gateways and modems.

Compatibility

Not for use in outdoor applications or for use in excessive temperature conditions.  Prolonged freezing will prevent batteries from functioning until thawed, using extended temperature range industrial batteries may improve the useful temperature range.  Extended freezing applications should use a full-time powered solution.  Prolonged exposure to extreme humidity conditions may damage this device.  The sensing element is rated for use for 5 years and may be replaced.  Exposure to high temperatures may cause the batteries to leak, causing permanent damage to this device.  NCD Warranty does not cover battery corrosion or use in excessively smoky environments under any circumstances.

900HP-S3B Wireless Compatibility Notes

Notice: Compatibility Notes Does NOT Apply to the Following Products:

  • NCD Enterprise Solutions
  • NCD Wireless Sensors
  • NCD Enterprise Modems and Gateways

Notice: Compatibility Notes Applies to NCD Industrial Products, Including Fusion, ProXR, ProXR Lite, Taralist, and Reactor Series Products.

Compatibility Notes

When using an 900HP-S3B communication module, it is essential that you use the ZIGMO_PCB to configure the module settings.  Long-Range wireless sensors may be programmed over the air without removing the communications module.

A 900HP-S3B Modem or a gateway of some kind that support the 900HP-S3B communications module will also be required.

Resources

Essential

Drawings

Mechanical Drawing

Wiring Diagrams

Click to Enlarge

Buy Now

Standard Lead Times

Standard lead times are 3-5 business days as we manufacture and test the product at the time of order. Larger orders may require additional time.

Product Identification
SKU: PR52-13
UPC: 689860069947
Country of Origin: US
HTS Code: 854231
1+ Pieces
$179.95/ea
10+ Pieces
$172.75/ea
25+ Pieces
$169.15/ea
100+ Pieces
$158.36/ea

Wireless Interface Options for NCD Enterprise IoT Sensors & DevicesChange

Where would you like to send your sensor data?

NCD Enterprise IoT Sensors and Devices are capable of communicating to computers and popular cloud platforms using a variety of interface technologies.  Please choose the communication interface technologies that best matches your application requirements.  You may choose more than one, as NCD Wireless Sensors are capable of sending data to multiple destinations simultaneously.

Wireless Communication OptionsChange

Please choose a wireless communications module that is legal for use in your region.  Please note: transmission range will be affected by the product options selected below.  If you are in North America, we strongly suggest the 900MHz option for best results.  If you are in Europe, the 868MHz version is the only legal option.  The 2.4GHz option is certified for use in the United States, Australia, Brazil, Japan, and South Korea.  Please note the 2.4GHz version will not penetrate objects as well as the 900MHz and 868MHz versions.  If you need help choosing a wireless option, please contact us.  This option will determine how we build this product and any applicable accessories that may be displayed below.

Antenna Extension CablesChange

Do you need to extend the Antenna? Use Any of these Antenna Extension Cables:

Two Magnetic AttachmentsChange


Customize

We Customize Just for You!!

NCD offers many custom IoT electronic design services to help tailor our product to your exact needs.  Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.

Custom IoT Electronic Design Services Process

Most of our users purchase off-the-shelf hardware for initial testing.  Once everything is working, they contact us to build a custom solution which may include specialized changes to the board, firmware, connectors, etc.  Custom boards have many advantages such as reduced wiring, easy installation, small size, less power consumption, and in some cases, an overall reduction in product cost.  Custom IoT Electronic Design Services will have your company name and logo on the board as well as the enclosure.

Customized IoT Electronics

NCD engineers can help build a customized solution for your particular application based on the designs you see on our website.  We can combine devices onto a single board, change the shape, or even some of the components to meet your exact needs.  We also provide turn-key metal enclosures with powder coating and full-color printing on the top side starting at just $500 for setup!  We have more than 20 years of experience in electronics design and manufacturing.  All of our products are designed and manufactured in the USA, so we are here to support the products we make.  We only ask that our customers prototype their needs using our existing products before we customize.

Customization Guidelines

  • Custom designs should be based on our existing product because we can’t build rockets or electric cars over here!
  • We do not provide customization services if it involves the introduction of a new or untested technology.
  • Custom engineering fees depend on your requirements, so please contact us for a quote!
  • We maintain ownership of all designs, including our customized designs as they are based on our existing Design.
  • We will only ship the customized product to you or your authorized agents.
  • We have an NDA available if needed.
  • The turn-around time is about 2-3 weeks.
  • We specialize in low-volume designs, no quantity is too small!
  • We have the ability to scale to large volumes as needed.

Getting Started with Product Customization

All you have to do is contact us and we will walk you through the process from beginning to end, based on your individual needs.  Some people are surprised at how fast we finish CAD design (usually a few hours), but keep in mind, we still have to build your design, which takes considerably more time.  When we customize product, here are the general services we provide:

  • We design the circuit board.
  • We communicate with our customers throughout the customization and manufacturing process.
  • We manufacture surface mount stencils and circuit boards.
  • We program our pick and place machines to build your boards.
  • We build a working sample and run it through our wave solder machine.
  • We test your custom IoT solution.
  • Once the design is finalized it won’t be possible to make changes during production (changes cost money and require us to repeat the above processes)
  • Once it meets all your requirements, we will start production as needed.
  • We work with our metal fabricators to design a metal enclosure if required.
  • You work with our artist to print the top side of the enclosure in full color with your company logo if required.

©2019 National Control Devices, LLC

ncd.io

Made in the USA
5 Year Warranty
Free Shipping on orders over $100
Free Shipping on orders over $100

To learn something new, take the path that you took yesterday. ~John Burroughs

Log in with your credentials

or    

Forgot your details?

Create Account