You are using an unsupported browser!

Please upgrade your version of IE to at least 9, or use a modern browser such as Chrome or Firefox.


  • Industrial Grade 3-axis Vibration Sensor with RMS, MAX and MIN g vibration
  • Vibration Range ±32g
  • Noise Removal using Low pass filter
  • Frequency Range( Bandwidth) up to 12800 Hz
  • Sample Rate up to 25600Hz
  • 2 Mile Range with On-Board Antenna
  • Operating Temperature Range -40 to +85 °C
  • External Probe With Inbuilt Sensor
  • Example Software for Visual Studio and LabVIEW
  • Vibration Sensor Probe Option
  • IP65 Rated Enclosure
  • Up to 500,000 Transmissions from 4 AA Batteries


SKU: PR52-33N UPC: 689860069954 Categories: , ,


Industrial IoT Wireless Vibration And Temperature Sensor

Our long range wireless enterprise series sensors are an easy to use and reliable start to any data aggregation application. This video will demonstrate how they work, what they do, and how to use them.

Industrial IoT Wireless Vibration And Temperature Sensor

Introducing NCD’s Long Range Industrial IoT wireless vibration and temperature sensor, boasting up to a 28 Mile range using a wireless mesh networking architecture. Incorporating a 16 Bit Vibration and temperature sensor, it transmits highly accurate data at user-defined intervals.

This Industrial IoT wireless vibration sensor samples 3-axis of Vibration data for 900 msec and then calculates RMS, Maximum and Minimum Vibration. It then combines this data with temperature samples in a packet to be sent to one or multiple receivers. At power up, the sensor reads multiple samples and takes their average as an offset value, then subtracts the offset from every sample taken afterwards (Make sure to power off the device being monitored during sensor power up.) Once the sensor stabilizes and starts sending data, the device/machinery being monitored can be powered on. After it sends data for the 900msec sampling, it goes back to sleep for a user defined interval, thus minimizing power consumption. which makes it an ideal wireless vibration monitoring system for industrial equipment.

Powered by just 4 AA batteries and an operational lifetime of 500,000 wireless transmissions, a 10 years battery life can be expected depending on environmental conditions and the data transmission interval.  Optionally, this sensor may be externally powered.

With an open communication protocol this sensor can be integrated with just about any control system or gateway.  Data can be transmitted to a PC, a Raspberry Pi, to Microsoft Azure® IoT, or Arduino. Sensor parameters and wireless transmission settings can be changed using the open communication protocol providing maximum configurability depending on the intended application.

The long range, price, accuracy, battery life and security features of Wireless Vibration Sensor makes it an affordable choice which exceeds the requirements for most of the industrial as well as consumer market applications.

Receiving Data From Industrial IoT Wireless Vibration and Temperature Sensor

This Long Range Industrial IoT wireless vibration and temperature sensor device sends data periodically, based on user-preset timing intervals. Data transmissions include battery level, signal strength, payload, firmware version, sensor type, and device serial number.  Please see the Resources section to see detailed information on the data structure of this device.  This Long Range IoT Wireless Vibration Temperature Sensor is a wireless transmitter needs a receiver.  There are many options available for receiving data from NCD transmitters.  We highly recommend using our USB Modem (available during purchase) so you can monitor this device and use our LabVIEW software for changing device settings.  Using our long-range USB wireless modem, users can expect easy operation over a virtual COM port at 115.2K baud.  Optionally, we offer a Wireless receiver that operates over Ethernet.  Data from NCD sensors will appear over TCP/IP on port 2101.  Simply open a TCP/IP socket, port 2101, to the IP address of the Ethernet modem and see your data stream in to your local area network.

General Vibration Guidelines

Here are some recommended Vibration standards, you can compare these readings with Long Range IoT Wireless Vibration Temperature Sensor to determine if your device is operating properly or if it needs any action

A. 0.01g or Less — Excellent condition, No action required

B. 0.35g or less — Good Condition, No action required unless the machine is noisy or running at abnormal temperature

C. 0.5g or less — Fair Condition, No action required unless the machine is noisy or running at abnormal temperature

D. 0.75g or More— Rough Condition, possible action required if machine is noisy and also check the bearing temperature

E. 1g or More  — Very Rough Conditions, further analysis and see if its doing this continuously. Also check for noise and temperature

F. 1.5g or More — Danger Level, there is definitely a problem in the machine or installation. Also check the temperature Log

G. 2.5g or More — Stutdown the Machine and look for possible causes. Call a technician for immediate repair

For Heavy Machinery these readings could be 1.5 times to 2 times more.

Now Supporting Microsoft Azure® IoT

We’ve been working with Microsoft engineers to post data from our sensors to Azure®.  If you need help integrating this sensor into Azure®, please let us know and we will work with you to get you connected!

Industrial IoT Wireless Vibration

We take software samples seriously!  Be sure to to check out the resources section of our web site to see code samples for Raspberry Pi, Visual Studio, LabVIEW, Arduino, Python, and more.  We can help you post data to your Azure IoT account with some of our tutorials!


  1. Wireless Industrial Vibration
  2. Machine Health Monitoring
  3. Ideal Component for Predicative Maintenance
  4. Future  Fail Detection In Machines
  5. Vibration and Temperature Monitoring For AWS/Azure
  6. Ideal For measuring Motor, Pumps,Compressors etc Vibrations

Industrial Wireless vs Long Range IoT

We realize that the Industrial Wireless line and the Long Range IoT line seem very similar and in fact are. The Industrial Wireless line has a few improvements over its counterpart in the Long Range Wireless line in form and fit, but maintain the same function.

Feature Industrial Wireless Long Range IoT
900 MHZ X X
868 MHz Option X
2-Mile Range X X
Battery Powered X X
Optional External Power X X
Wireless Mesh Capabilities X X
IP65/Outdoor Rated X
Magnetic Mounting Attachments X Optional
External Sensor Probe Optional

Individual Industrial Wireless lines may have a longer battery life, optional off-board sensors, more accurate readings, or many other differences that are stated on the product’s web page.


Not for use in outdoor applications or for use in excessive temperature conditions.  Prolonged freezing will prevent batteries from functioning until thawed, using extended temperature range industrial batteries may improve the useful temperature range.  Extended freezing applications should use a full-time powered solution.  Prolonged exposure to extreme humidity conditions may damage this device.  The sensing element is rated for use for 5 years and may be replaced.  Exposure to high temperatures may cause the batteries to leak, causing permanent damage to this device.  NCD Warranty does not cover battery corrosion or use in excessively smoky environments under any circumstances.



Mechanical Drawing

Wireless Sensor Enclosure

Sensor Probe Dimensions

Wireless Sensor Probe

Wiring Diagrams

Click to Enlarge
Click to Enlarge

Buy Now

Standard Lead Times

Standard lead times are 3-5 business days as we manufacture and test the product at the time of order. Larger orders may require additional time.
Product Identification
SKU: PR52-33N
UPC: 689860069954
Country of Origin: US
HTS Code: 854231
1+ Pieces
10+ Pieces
25+ Pieces
100+ Pieces

Antenna Extension CablesChange

Do you need to extend the Antenna? Use Any of these Antenna Extension Cables:

900HP-S3B Long Range Wireless ModemChange

You will need at least one 900HP-S3B Modem to talk to our complete line of 900HP-S3B Wireless Mesh devices.


We Customize Just for You!!

NCD offers many custom IoT electronic design services to help tailor our product to your exact needs.  Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.

Custom IoT Electronic Design Services Process

Most of our users purchase off-the-shelf hardware for initial testing.  Once everything is working, they contact us to build a custom solution which may include specialized changes to the board, firmware, connectors, etc.  Custom boards have many advantages such as reduced wiring, easy installation, small size, less power consumption, and in some cases, an overall reduction in product cost.  Custom IoT Electronic Design Services will have your company name and logo on the board as well as the enclosure.

Customized IoT Electronics

NCD engineers can help build a customized solution for your particular application based on the designs you see on our website.  We can combine devices onto a single board, change the shape, or even some of the components to meet your exact needs.  We also provide turn-key metal enclosures with powder coating and full-color printing on the top side starting at just $500 for setup!  We have more than 20 years of experience in electronics design and manufacturing.  All of our products are designed and manufactured in the USA, so we are here to support the products we make.  We only ask that our customers prototype their needs using our existing products before we customize.

Customization Guidelines

  • Custom designs should be based on our existing product because we can’t build rockets or electric cars over here!
  • We do not provide customization services if it involves the introduction of a new or untested technology.
  • Custom engineering fees depend on your requirements, so please contact us for a quote!
  • We maintain ownership of all designs, including our customized designs as they are based on our existing Design.
  • We will only ship the customized product to you or your authorized agents.
  • We have an NDA available if needed.
  • The turn-around time is about 2-3 weeks.
  • We specialize in low-volume designs, no quantity is too small!
  • We have the ability to scale to large volumes as needed.

Getting Started with Product Customization

All you have to do is contact us and we will walk you through the process from beginning to end, based on your individual needs.  Some people are surprised at how fast we finish CAD design (usually a few hours), but keep in mind, we still have to build your design, which takes considerably more time.  When we customize product, here are the general services we provide:

  • We design the circuit board.
  • We communicate with our customers throughout the customization and manufacturing process.
  • We manufacture surface mount stencils and circuit boards.
  • We program our pick and place machines to build your boards.
  • We build a working sample and run it through our wave solder machine.
  • We test your custom IoT solution.
  • Once the design is finalized it won’t be possible to make changes during production (changes cost money and require us to repeat the above processes)
  • Once it meets all your requirements, we will start production as needed.
  • We work with our metal fabricators to design a metal enclosure if required.
  • You work with our artist to print the top side of the enclosure in full color with your company logo if required. and ControlEverything Site Migration Notes

©2018 National Control Devices, LLC

Made in the USA
5 Year Warranty
Free Shipping on orders over $100
Free Shipping on orders over $100

To learn something new, take the path that you took yesterday. ~John Burroughs

Log in with your credentials


Forgot your details?

Create Account