Industrial IoT Long Range Wireless Electrical Conductivity EC Sensor
Please note that images above may contain product not included with purchase.
Highlights
- Industrial Grade Wireless Electrical Conductivity and Temperature Sensor
- EC Measurement Accuracy ±2%FS ±2°C temperature
- 3/4inch NPT connector Housing
- Stainless steel housing with Platinum Electrode
- Two Probe Options:
- Low EC Range 20-2000uS/cm
- High EC Range 0-20,000uS/cm
- Cell Constant K = 1 ( other ranges available as well)
- 2 Mile Line-of-Sight Range with On-Board Antenna
- Superior LOS Range of up to 28 Miles with High-Gain Antennas
- Interface to Raspberry Pi, Microsoft® Azure®, Arduino and More
- Example Software for Visual Studio and LabVIEW®
- Wireless Mesh Networking using DigiMesh®
- Open Communication Protocol for Easy Software Integration
- Validates and Retries Lost Communication Packets
- * USB Modem is recommended for Calibration and Sensor Setup
Industrial IoT Long Range Wireless Electrical Conductivity EC And Temperature Sensor
Introducing NCD’s Industrial IoT Long Range Wireless Electrical Conductivity EC and Temperature Sensor, boasting up to a 2 mile range using a secure wireless mesh networking architecture. It incorporates a high resolution EC probe that samples liquid Electrical Conductivity at user defined intervals and transmits the result to remote modems and gateways.
The EC probe for this sensor contains a built-in temperature sensor that will give temperature readings along with the EC data. This transmitter will send beacons of high-accuracy (±2%EC and ±2°C temperature) data at user-defined intervals with outstanding precision. The EC probe comes with a 5 meter long cable and has a 3/4 inch NPT housing. The probe is rated for 15°C to 60°C and can withstand a max pressure of 100 PSI.
This Industrial IoT Long Range Wireless EC and Temperature Sensor does require periodic calibration. The calibration period depends on the usage of the equipment. The calibration process can be done in house and the calibration steps can be found in the product manual. The probe can stay submerged in the liquid during its entire life span.
This Industrial IoT Long Range Wireless EC and Temperature Sensor is powered by just 6 AA batteries and has an operational lifetime of 300,000 wireless transmissions. 10 years of battery life can be expected, depending on environmental conditions and the data transmission interval. Optionally, this sensor may be externally powered, as it supports a 6-32 VDC external power supply.
The long range, accuracy, precision, low price, battery life and security features of the Long Range Industrial IoT Wireless EC and Temperature Sensor makes it an affordable choice which exceeds the requirements for most of the industry as well as consumer market applications. This sensor can be applied to many fields of work when testing water quality in a variety of environments.
NOTE: The minimum data transmission interval is 2 minutes.
Transmission Interval
This device sends data periodically, based on user-preset timing intervals.
Electrical Conductivity sensor Applications
- Liquid EC
- Temperature
- Green House
- Agriculture
- Water Quality
- Industry Standard Measurement
Mechanical Drawing
Wiring Diagrams
Essential
- Wireless IoT Electrical Conductivity and Temperature Sensor Product Manual
- Long Range IoT Wireless Sensor FAQ
Documentation Downloads
Enterprise 868 MHz Sensors
Enterprise 900MHz Sensors
Not for use in outdoor applications or for use in excessive temperature conditions. Prolonged freezing will prevent batteries from functioning until thawed, using extended temperature range industrial batteries may improve the useful temperature range. Extended freezing applications should use a full-time powered solution. Prolonged exposure to extreme humidity conditions may damage this device. The sensing element is rated for use for 5 years and may be replaced. Exposure to high temperatures may cause the batteries to leak, causing permanent damage to this device. NCD Warranty does not cover battery corrosion or use in excessively smoky environments under any circumstances.
900HP-S3B Wireless Compatibility Notes
Notice: Compatibility Notes Does NOT Apply to the Following Products:
- NCD Enterprise Solutions
- NCD Wireless Sensors
- NCD Enterprise Modems and Gateways
Notice: Compatibility Notes Applies to NCD Industrial Products, Including Fusion, ProXR, ProXR Lite, Taralist, and Reactor Series Products.
Compatibility Notes
When using an 900HP-S3B communication module, it is essential that you use the ZIGMO_PCB to configure the module settings. Long-Range wireless sensors may be programmed over the air without removing the communications module.
A 900HP-S3B Modem or a gateway of some kind that support the 900HP-S3B communications module will also be required.