Industrial IoT Long Range Wireless 4-20mA Current Loop Receiver
Please note that images above may contain product not included with purchase.
Highlights
- Industrial Grade 1-Channel 4-20mA Current Loop Receiver
- Input Range 0-20mA with 15-bit Resolution
- On Board 16V Supply to Power up the external 4-20mA Devices
- Supports Active Two Wire 4-20mA Devices ( Checkout drawing section for more info)
- Auto ADC Transmission on Analog Voltage Change Detection
- Converts 2 wire 4-20mA devices into Wireless Nodes
- 2 Mile Line-of-Sight Range with On-Board Antenna
- Superior LOS Range of up to 28 Miles with High-Gain Antennas
- Interface to Raspberry Pi, Microsoft® Azure®, Arduino and More
- Example Software for Visual Studio and LabVIEW®
- Wireless Mesh Networking using DigiMesh®
- Open Communication Protocol for Easy Software Integration
- Validates and Retries Lost Communication Packets
Industrial IoT Wireless 4-20mA Current Loop Receiver
Introducing NCD’s Long Range One Channel Industrial IoT Wireless 4-20mA Current Loop Receiver, boasting up to a 2 Mile range using a wireless mesh networking architecture. It incorporates a High resolution 1 channel 16-bit ADC that samples 4-20mA analog inputs at user defined intervals and transmits the result to remote modems and gateways. Between samples, this device enters a ultra-low power sleep mode to minimize power consumption. This Industrial IoT Wireless 4-20mA Current Loop Receiver has an additional feature of detecting change in current every 7 seconds (user configurable) and sending out ADC samples if the change in current on any channel is greater than 10% (user configurable). Both features work simultaneously to support multiple application areas in one package.
This Industrial IoT Wireless 4-20mA Current Loop Receiver has on board 16V buck boost power supply, thus eliminates requirement of external power supply. This power supply is used to power up the external 4-20mA sensor. This device can be used with any 2 wire 4-20mA sensor/device into a wireless nodes.
This Industrial IoT Wireless 4-20mA Current Loop Receiver is powered by just 4 AA batteries and an operational lifetime of 500,000 wireless transmissions, a 10 years battery life can be expected depending on environmental conditions and the data transmission interval. Optionally, this sensor may be externally powered. This product has capabilities of supporting 6-32VDC external power supply (Optional).
The long range, price, accuracy, battery life and security features of Long Range Industrial IoT Wireless 4-20mA Current Receiver makes it an affordable choice which exceeds the requirements for most of the industrial as well as consumer market applications.
NOTE: This 4-20mA Current Receiver Provide 16VDC Current Loop Power Supply. This devices can power up the external sensor while measuring 4-20mA signal.
This formula can be used to convert a raw Analog Value into 4-20mA.
mA = raw_adc * 0.00063168
Transmission Interval
This device sends data periodically based on user-preset timing intervals.
loop Receiver Sensor Applications
- Current Output Analog Sensor Interface
- Wireless Flow Meter Monitoring
- Long Range Wireless 4-20mA Current Monitoring
- Analog Transducer Interface
- Read Sensors Like Force, Strain Gauge, Pressure, Flow Meter
- 4-20mA Analog Input to AWS or Azure Cloud Services
Read more about Current Receiver
- How To Bring 4-20mA Loop Powered Sensors to the IoT World
- IoT 4-20mA signal Splitter Product Manual
- Industrial IoT Wireless High Resolution 4-20mA Receiver Product Manual
- 4-Channel 4-20mA Output USB Wireless endNode Getting Started
- 4-Channel 4-20mA Current Loop Input USB Wireless endNode Getting Started
- 4-20mA 4 channel Mirror Serial Configuration Commands
- How to Convert 4-20mA Current Loop to Voltage/Digital Conversion
Mechanical Drawing
Wiring Diagrams
Essential
- Industrial IoT Wireless High Resolution 4-20mA Receiver Product Manual
- Long Range IoT Wireless Sensor FAQ
Documentation Downloads
Community Repositories
Enterprise 868 MHz Sensors
Enterprise 900MHz Sensors
Max Error Rate — =/-2%FS
Not for use in outdoor applications or for use in excessive temperature conditions. Prolonged freezing will prevent batteries from functioning until thawed, using extended temperature range industrial batteries may improve the useful temperature range. Extended freezing applications should use a full-time powered solution. Prolonged exposure to extreme humidity conditions may damage this device. The sensing element is rated for use for 5 years and may be replaced. Exposure to high temperatures may cause the batteries to leak, causing permanent damage to this device. NCD Warranty does not cover battery corrosion or use in excessively smoky environments under any circumstances.
900HP-S3B Wireless Compatibility Notes
Notice: Compatibility Notes Does NOT Apply to the Following Products:
- NCD Enterprise Solutions
- NCD Wireless Sensors
- NCD Enterprise Modems and Gateways
Notice: Compatibility Notes Applies to NCD Industrial Products, Including Fusion, ProXR, ProXR Lite, Taralist, and Reactor Series Products.
Compatibility Notes
When using an 900HP-S3B communication module, it is essential that you use the ZIGMO_PCB to configure the module settings. Long-Range wireless sensors may be programmed over the air without removing the communications module.
A 900HP-S3B Modem or a gateway of some kind that support the 900HP-S3B communications module will also be required.