IoT Long Range Wireless PIR Motion Detection Sensor
Please note that images above may contain product not included with purchase.
Highlights
-
- Industrial Grade IoT Motion Detection Sensor
- Configurable Detection Frequency/Sensitivity
- Uses Interrupts for Motion detection with very little power consumption
- Measuring range: 5 meter
- Custom Detection Range and Angle Options Available
- Operating Temperature Range -40 to +70 °C
- Superior LOS Range of up to 28 miles with 900MHz High-Gain Antennas
- Interface to Raspberry Pi, Microsoft Azure, Arduino and More
- Example Software for Visual Studio and LabVIEW
- Wireless Mesh Networking using DigiMesh®
- 256 Sensor Node per Network
- Open Communication Protocol for custom interfacing applications
- Small Form Factor Wireless Sensor (3×3 inch)
IoT Wireless PIR Motion Detection Sensor
Introducing NCD’s Industrial IoT Wireless PIR Motion Detection Sensor, boasting up to a 2 Mile range using a wireless mesh networking architecture. This IoT Wireless PIR Motion Detection Sensor incorporates a high-accuracy 5m Range Panasonic Passive IR PIR Sensor. Designed to cover a wide area, this sensor detects human presence. The sensor, rather than emitting light such as from LEDs, detects the amount of change in infrared rays that occurs when a person (object),whose temperature is different from the surroundings,moves. When the motion exceeds user defined frequency, this IoT Wireless PIR Motion Detection Sensor will send a wireless message to a remote gateway or modem, and then go back to sleep for a pre-configured period of time. This PIR Motion Detection Sensor makes extensive use of interrupts to enter the lowest possible power state while sleeping. This device sends data once motion has been detected and at regular intervals to “Check-in”, letting you know the IoT Wireless PIR Motion Detection Sensor is still in operation and ready to go to work.
Advanced Feature Settings
This IoT Wireless PIR Motion Detection Sensor has numerous configuration parameters available that may be fine-tuned for your specific application. Set the detection frequency to trigger alerts when sensor exceeds these predefined thresholds.
Powered by just 2 AA batteries and an operational lifetime of 300,000 wireless transmissions, a 10 year battery life can be expected depending on environmental conditions and the data transmission interval. Optionally, this sensor may be externally powered.
The long range, price, accuracy, battery life and security features of IoT Wireless PIR Motion Detection Sensor makes it an affordable choice which exceeds the requirements for most of the industrial as well as consumer market applications.
Receiving Data From Long Range IoT Wireless PIR Motion Detection Sensor
This Long Range IoT Wireless PIR Motion Detection Sensor device sends data periodically, based on user-preset timing intervals and when a Valid motion is detected.
Transmission Interval
This device sends data periodically, based on user-preset timing intervals.
This device sends data when vibration changes outside preset thresholds are detected.
Wireless Motion Sensor Applications
- Wireless Industrial Area Monitoring
- Motion Detection
- Human Presence Detection
- IoT Security Applications
- Wireless Human Motion Monitoring for AWS® and Azure®
Mechanical Drawing
Wiring Diagrams
Essential
Enterprise 868 MHz Sensors
Enterprise 900MHz Sensors
Not for use in outdoor applications or for use in excessive temperature conditions. Prolonged freezing will prevent batteries from functioning until thawed, using extended temperature range industrial batteries may improve the useful temperature range. Extended freezing applications should use a full-time powered solution. Prolonged exposure to extreme humidity conditions may damage this device. The sensing element is rated for use for 5 years and may be replaced. Exposure to high temperatures may cause the batteries to leak, causing permanent damage to this device. NCD Warranty does not cover battery corrosion or use in excessively smoky environments under any circumstances.
900HP-S3B Wireless Compatibility Notes
Notice: Compatibility Notes Does NOT Apply to the Following Products:
- NCD Enterprise Solutions
- NCD Wireless Sensors
- NCD Enterprise Modems and Gateways
Notice: Compatibility Notes Applies to NCD Industrial Products, Including Fusion, ProXR, ProXR Lite, Taralist, and Reactor Series Products.
Compatibility Notes
When using an 900HP-S3B communication module, it is essential that you use the ZIGMO_PCB to configure the module settings. Long-Range wireless sensors may be programmed over the air without removing the communications module.
A 900HP-S3B Modem or a gateway of some kind that support the 900HP-S3B communications module will also be required.