IoT Long Range Wireless Pressure and Temperature Sensor
Highlights
- Industrial Grade Sensor Long Range Wireless Pressure Temperature Sensor
- Operating Range 0 to 14000 mbar -40° to +85°C (-40° to 185°F)
- Configurable Internal Calculation Pressure Resolution 0.012 to 0.065 mbar
- Configurable Internal Calculation Temperature Resolution 0.002 to 0.012 °C
- Accuracy ±2.5 mbar, ±2 °C
- Absolute Pressure, Relative Pressure and Relative Altitude Change outputs
- 2 Mile Line-of-Sight Range with On-Board Antenna
- Superior LOS Range of up to 28 Miles with High-Gain Antennas
- Interface to Raspberry Pi, Microsoft® Azure®, Arduino and More
- Example Software for Visual Studio and LabVIEW®
- Wireless Mesh Networking using DigiMesh®
- Open Communication Protocol for Easy Software Integration
- Small 3″ x 3″ Form Factor for this Wireless Sensor
- Power-Efficient Sleep Mode, Up to 10 Year Battery Life
- User Configurable Sleep duration
- Up to 500,000 Transmissions from 2 AA Batteries
- Includes Battery Level with Every Transmission
- Validates and Retries Lost Communication Packets
IoT Long Range Wireless Pressure and Temperature Sensor
Introducing NCD’s Long Range IoT Wireless Temperature Barometric Pressure Sensor, with an incredible 2 Mile wireless range using a wireless mesh networking architecture. Incorporating a high-resolution pressure sensor, this IoT sensor transmits highly accurate data at user-defined intervals. Measure pressure and temperature with user configurable resolution at user defined intervals. During sleep, this IoT sensors enters a ultra-low power state to conserve battery life. This IoT sensor takes baseline pressure and altitude input to determine subsequent change in pressure and altitude.
Powered by just 2 AA batteries and an operational lifetime of 500,000 wireless transmissions, a 10 years battery life can be expected depending on environmental conditions and the data transmission interval. Optionally, this sensor may be externally powered.
The long range, price, accuracy, battery life and security features of Wireless Temperature Barometric Pressure Sensor makes it an affordable choice which exceeds the requirements for most of the industrial as well as consumer market applications.
Transmission Interval
This device sends data periodically, based on user-preset timing intervals.
![IoT Wireless Temperature Barometric Pressure Sensor](https://media.ncd.io/sites/2/20180410110122/IoT-Wireless-Temperature-Barometric-Pressure-Sensor.png)
Wireless Pressure Sensor Applications
- In House Temperature Barometric Pressure monitoring
- Temperature Barometric Pressure Monitoring In the Hospitals
- In Medical Pressure Monitoring Applications
- In Medicine or Pressure Temperature Critical Storage Units
- HVAC Air Pressure and Temperature Monitoring
- Pressure And Temperature Data Logging Applications
- Cloud Weather Monitoring Monitoring for AWS® and Azure®
Mechanical Drawing
Wiring Diagrams
Essential
- Long Range IoT Wireless Temperature Barometric Pressure Sensor Product Manual
- Long Range IoT Wireless Sensor FAQ
Examples
Documentation Downloads
Community Repositories
Enterprise 868 MHz Sensors
Enterprise 900MHz Sensors
Not for use in outdoor applications or for use in excessive temperature conditions. Prolonged freezing will prevent batteries from functioning until thawed, using extended temperature range industrial batteries may improve the useful temperature range. Extended freezing applications should use a full-time powered solution. Prolonged exposure to extreme humidity conditions may damage this device. The sensing element is rated for use for 5 years and may be replaced. Exposure to high temperatures may cause the batteries to leak, causing permanent damage to this device. NCD Warranty does not cover battery corrosion or use in excessively smoky environments under any circumstances.
900HP-S3B Wireless Compatibility Notes
Notice: Compatibility Notes Does NOT Apply to the Following Products:
- NCD Enterprise Solutions
- NCD Wireless Sensors
- NCD Enterprise Modems and Gateways
Notice: Compatibility Notes Applies to NCD Industrial Products, Including Fusion, ProXR, ProXR Lite, Taralist, and Reactor Series Products.
Compatibility Notes
When using an 900HP-S3B communication module, it is essential that you use the ZIGMO_PCB to configure the module settings. Long-Range wireless sensors may be programmed over the air without removing the communications module.
A 900HP-S3B Modem or a gateway of some kind that support the 900HP-S3B communications module will also be required.