Industrial Wireless Activity Detector
Please note that images above may contain product not included with purchase.
Highlights
- Industrial Grade Accelerometer with 3-axis for Activity Detection
- Configurable Activity Detection Parameters with Interrupts
- Configurable Acceleration Range ±2g to ±16g
- Configurable Interrupt Threshold ±16mg to ±15.3g
- Configurable Data Rate 1Hz to 5.37KHz
- Configurable Interrupt Duration 200us to 1sec
- Customizable Interrupt Types with Combinations
- Wall-Mounted or Magnet Mounted IP65 Rated Enclosure
- 2 Mile Line-of-Sight Range with On-Board Antenna
- Superior LOS Range of up to 28 Miles with High-Gain Antennas
- Interface to Raspberry Pi, Microsoft® Azure®, Losant, and More
- Example Software for Visual Studio and LabVIEW®
- Wireless Mesh Networking using DigiMesh®
- Open Communication Protocol for Easy Software Integration
- Small 3″ x 3″ Form Factor Wireless IoT Activity Sensor
- Power-Efficient Sleep Mode, Up to 10 Year Battery Life
- User Configurable Sleep duration
- Up to 300,000 Transmissions from 4 AA Batteries
- Includes Battery Level with Every Transmission
- Validates and Retries Lost Communication Packets
Industrial Wireless Activity Detector
Introducing NCD’s Industrial Wireless Activity Detector, boasting up to a 2 Mile range using a wireless mesh networking architecture. This devices incorporates a high-accuracy acceleration sensor for measuring acceleration changes. These acceleration changes are used to determine mechanical movement (activity). When activity is detected, this device will send a wireless message to a remote gateway or modem, and then go back to sleep for a pre-configured period of time. This device makes extensive use of interrupts to enter the lowest possible power state while sleeping. This device sends data once activity has been detected and at regular intervals to “Check-in”, letting you know the activity detector is still in operation and ready to go to work.
Advanced Feature Settings
This activity detector has numerous configuration parameters available that may be fine-tuned for your specific application. Set parameters for acceleration range, data rate, interrupt duration, and interrupt threshold. With the ability to detect movement in all directions, acceleration limits (in g units) can be defined for all 3 axis of movement. Moreover, the user may configure OR/AND gates between the interrupts. This allows activity detection (system interrupt) if any single axis interrupt fires (OR condition) or if all axis interrupts fire (AND condition). User can also configure a delay time in seconds which disables the interrupt for that amount of time after a successful interrupt. This enables a user to make sure that the sensor does not drain its battery (with continuous transmissions) if an interrupt condition persists or a wrong condition is accidentally programmed. This time is also used to send a periodic packet to a receiver with latest available data.
Powered by just 4 AA batteries and an operational lifetime of 300,000 wireless transmissions, a 10 year battery life can be expected depending on environmental conditions and the data transmission interval.
The long range, price, accuracy, battery life and security features of Wireless Activity Detector makes it an affordable choice which exceeds the requirements for most of the industrial as well as consumer market applications.
NOTE: The current version of this sensor does not support the inbuilt temperature sensor.
Transmission Interval
This device sends data periodically, based on user-preset timing intervals.
This device sends data when input thresholds exceed user-defined preset limits.
Outdoor Wireless Motion Detector Applications
- Wireless Industrial Tools Monitoring
- Machine on/off state detection
- Machine Activity Detection
- IoT Security Applications
- Wireless Activity Monitoring for AWS® and Azure®
Mechanical Drawing
Sensor Probe Dimensions
Wiring Diagrams
Essential
Documentation Downloads
Community Repositories
Enterprise 868 MHz Sensors
Enterprise 900MHz Sensors
Not for use in outdoor applications or for use in excessive temperature conditions. Prolonged freezing will prevent batteries from functioning until thawed, using extended temperature range industrial batteries may improve the useful temperature range. Extended freezing applications should use a full-time powered solution. Prolonged exposure to extreme humidity conditions may damage this device. The sensing element is rated for use for 5 years and may be replaced. Exposure to high temperatures may cause the batteries to leak, causing permanent damage to this device. NCD Warranty does not cover battery corrosion or use in excessively smoky environments under any circumstances.
Tested and verified for use with NCD Micro Gateway Products.
900HP-S3B Wireless Compatibility Notes
Notice: Compatibility Notes Does NOT Apply to the Following Products:
- NCD Enterprise Solutions
- NCD Wireless Sensors
- NCD Enterprise Modems and Gateways
Notice: Compatibility Notes Applies to NCD Industrial Products, Including Fusion, ProXR, ProXR Lite, Taralist, and Reactor Series Products.
Compatibility Notes
When using an 900HP-S3B communication module, it is essential that you use the ZIGMO_PCB to configure the module settings. Long-Range wireless sensors may be programmed over the air without removing the communications module.
A 900HP-S3B Modem or a gateway of some kind that support the 900HP-S3B communications module will also be required.