Long Range IoT Wireless RTD Temperature Sensor
Please note that images above may contain product not included with purchase.
Highlights
- Industrial Long Range Wireless RTD Temperature Sensor Transmitter
- Industrial Grade with an Accuracy of ±0.5°C FS
- Works with Any PT100 100-Ohm 3-Wire Sensor
- Includes Sample PT100 Sensor for Experimentation Purposes
- 15-Bit ADC Resolution; Nominal Temperature Resolution 0.03125NC
- 3-Wire Differential VREF Inputs for Common RTD Sensors
- Up to 500,000 Transmissions from 2 AA Batteries
- 2-Mile Line of Sight Range with On-Board Antenna
- Superior LOS Range of up to 28 miles with High-Gain Antennas
- Supports Multiple Cloud Platforms Including:
- Amazon® AWS®, Microsoft® Azure®, MQTT, and Losant
- Send RTD Data to Multiple Communication Technologies, Including:
- Ethernet, USB, RS-485, Bluetooth, WiFi, and Serial Modems
- Example Software for Visual Studio and LabVIEW®
- Supports Wireless Mesh Networking
- NO Monthly Fees or Locked Proprietary Protocols
Retired Notice: This Sensor is Retired
This sensor is currently retired. We don’t recommend this product for new customers. Don’t worry though, we can still make it for you if it’s absolutely required, but minimum purchase quantities of 10 pieces will apply. We may need extra time to get this back into production, please click the “Help” Button in the lower right corner of the screen to contact us. We do have alternative sensors available. The extra batteries and extended battery life in the updated version has been a great benefit to our customers. Please see the updated product below:
IoT Long Range Wireless RTD Temperature Sensor Transmitter
The NCD industrial IoT long range Wireless RTD Temperature Sensor Transmitter is capable of measuring extreme high and low temperatures with incredible precision. This Industrial Wireless RTD Temperature Sensor transmitter support any 100 Ohm 3-Wire RTD sensor, and includes a free RTS PT100 probe for the purposes of experimentation and testing within room temperature environments, but best results are achieved when connecting a high-quality sensor that meets your application requirements. This RTD sensor transmitter includes a on-board RTD signal amplifier for precision measurement. This wireless IoT RTD Temperature Sensor Transmitter is ideal for industrial temperature monitoring applications supporting extreme temperature ranges, such as industrial boiler temperature measurement, liquid temperature measurement, and temperature monitoring of food storage units. The NCD Wireless RTD Temperature Sensor Transmitter is designed to consume extremely low power and send data at extremely long distances of up to 2 miles line-of-light or up to 28 miles using high gain antennas.
Powered by just 2 AA batteries with a operational lifetime of 500,000 wireless transmissions, you can expect to achieve up to 10 years of battery life depending on environmental conditions and the transmission interval you choose. Optionally, this sensor may be externally powered.
There is no better IoT Long Range Wireless RTD Temperature Sensor Transmitter on the market today. Nothing compares with the long range, the price, the accuracy, the battery life, or the security features we have to offer.
Transmission Interval
This device sends data periodically, based on user-preset timing intervals.
RTD Temperature Sensor Applications
- Food Storage Temperature Monitoring
- HVAC High-Side Low-Side Temperature Monitoring
- Industrial Boiler Temperature Measurements
- Liquid Temperature Measurement
- Oven Temperature Monitoring
Mechanical Drawing
Wiring Diagrams
Essential
- How to Setup the NCD IoT Wireless RTD Temperature Sensor
- Difference Between RTD Sensor and Thermocouple
- How to Choose a RTD Probe for your Wireless Temperature Sensor
- Wireless RTD Sensor with Node Red
- Long Range IoT Wireless Thermocouple Sensor Product Manual
- Long Range IoT Wireless Sensor FAQ
Documentation Downloads
Enterprise 868 MHz Sensors
Enterprise 900MHz Sensors
- This Product comes with a free sample RTD PT100 probe
- Actual probe may vary in appearance from the photos shown
- Included Probe is Subject to Change without Notice
- Included Probe is for Experimentation and Sample Testing ONLY
- For Use with Probes Suitable for your Specific Application
- It is not recommended to use the included probe in production environment
- This Product will work with any 100 Ohm 3-Wire PT100 RT probe
The main electronics of this device should not be used in outdoor applications or for use in excessive temperature conditions, as only the temperature probe is rated for use in extreme temperatures. It may be necessary to mount the electronics in a protected environment for optimal battery life. Prolonged freezing will prevent batteries from functioning until thawed, using extended temperature range industrial batteries may improve the useful temperature range. Extended freezing applications should use a full-time powered solution. Prolonged exposure to extreme humidity conditions may damage this device. Exposure to high temperatures may cause the batteries to leak, causing permanent damage to this device. NCD Warranty does not cover battery corrosion or use in excessively smoky environments under any circumstances. The RTD sensor included with this device is for sample purposes only, as a RTD PT100 probe suitable for your specific application is required for long-term use. This device is compatible with any 100 Ohm 3-Wire RTD sensor.
15-Bit ADC Resolution; Nominal Temperature Resolution 0.03125NC (Varies Due to RTD Nonlinearity)
Please See MAX31865 Datasheet for Complete Compatibility Information
900HP-S3B Wireless Compatibility Notes
Notice: Compatibility Notes Does NOT Apply to the Following Products:
- NCD Enterprise Solutions
- NCD Wireless Sensors
- NCD Enterprise Modems and Gateways
Notice: Compatibility Notes Applies to NCD Industrial Products, Including Fusion, ProXR, ProXR Lite, Taralist, and Reactor Series Products.
Compatibility Notes
When using an 900HP-S3B communication module, it is essential that you use the ZIGMO_PCB to configure the module settings. Long-Range wireless sensors may be programmed over the air without removing the communications module.
A 900HP-S3B Modem or a gateway of some kind that support the 900HP-S3B communications module will also be required.
Retired Notice: This Sensor is Retired
This sensor is currently retired. We don’t recommend this product for new customers. Don’t worry though, we can still make it for you if it’s absolutely required, but minimum purchase quantities of 10 pieces will apply. We may need extra time to get this back into production, please click the “Help” Button in the lower right corner of the screen to contact us. We do have alternative sensors available. The extra batteries and extended battery life in the updated version has been a great benefit to our customers. Please see the updated product below: