Important Shipping Delay and Holiday Closing Notices: PLEASE CLICK HERE. Dismiss

You are using an unsupported browser!

Please upgrade your version of IE to at least 9, or use a modern browser such as Chrome or Firefox.

Features

  • Industrial Quality WiFi Relays
  • Available with 1, 2, 4, or 8 On-Board Relays
  • Available with 20 or 30-Amp Relays
  • ProXR Command Set Used by Industry for Many Years
  • Supports Windows, Mac, Linux, and Android
  • Supports LabVIEW and Visual Studio
  • TCP Socket or Virtual Serial Port Communications
  • Use NCD Base Station Software to Learn Commands

$142.00

SKU: PL_WIFI_2030 UPC: 689860072350 Categories: , ,

Description

WiFi Relays from NCD

Our WiFi Relay boards makes it easy for computers of all types to control relays and monitor analog inputs. WiFi Relays allow you turn relays on or off, flash relays continuously, control relays for a duration of time, and control relays in groups using a cross-platform compatible WiFi interface.  NCD ProXR Lite series controllers are a widely adopted standard used by industry for many years.  Equipped with your choice of 1, 2, 4, or 8 on-board relays, the ProXR Lite series WiFi Relays suit the needs of most of our customers.  Integrated Analog to Digital Converters may be used to manually control the relays, or they may be used to read external sensors.  Equipped with 8 or 10-Bit resolution, the ADC built into each WiFi Relay adds tremendous flexibility for various application requirements. WiFi relays support DHCP or a Static IP address with a programmable port number, 2101 is used by default.  NCD WiFi communications module will transmit the IP address of the device using periodic UDP broadcasts, which make it easy to locate the device on a network.  On-board RGB LED indicates connection status while two on-board buttons may be used to initiate the setup process.  In addition to WiFi, the latest generation communications module also supports Bluetooth and USB connectivity.

Getting Started with a WiFi Relay

Start by downloading Base Station at https://ncd.io/start and Run the application.  A window will appear which listens for all NCD UDP broadcasts.  Plug in your WiFi Relay Board and wait for the Network window to populate with the IP address of the WiFi Relay Board.  Simply click the IP address of the device and “OK” to establish a connection. Base Station is a tool designed to teach you all the features built into your controller and provide you with example commands.  Base Station was written for Windows using Visual Studio (source code available on the download page linked above).  Base Station shows you all the commands you need for controlling relays and monitoring external sensors.


New Version Now Shipping

Beginning Late 2020, we’ve made some updates to this product to make it better with increased component count while maintaining the same functionality and footprint.  The New Rev G2 Series adds a better power supply circuit to improve noise immunity while providing increased power to the communications socket.  We also improved the relay drive circuit to better handle inductive loads.  We also changed the color of the circuit board to Black and updated the branding to ncd.io with updated logos.  

This is the same product you have been buying for years, but now with improved electronics and while maintaining the same footprint as the original design.  Most importantly, this is now a Legacy product, which means it will never go obsolete as long as critical parts are still available to us.  Built with our new high-speed pick and place assembly line, we can complete the surface mount assembly process at a rate of several thousand units per day with the potential to scale to any volume you could imagine, so you never need to worry about supply quantities or supply chain problems.

Please note that it was necessary for us to remove the integrated temperature sensor in select versions of this product.  This sensor was providing incorrect readings if the relays were active for extended periods of time.  We can help you with an off-board sensor if needed.

Updated Features

  • Updated Logos and Branding, Changed PCB Color to Black
  • Improved Relay Drive Circuit for Greater Noise Immunity
  • Improved Power Supply Circuit using a Switcher Regulator for Lower Heat and Higher Power
  • Adds Compatibility with NCDD5500 Ethernet and our WiFi/Bluetooth Communication Modules
  • Use MQTT to Talk to this Device from the Internet when using our New WiFi Module
  • Use Integrated Web Page to Control This Device when using our New Ethernet or WiFi Module
  • Added Zip Tie Holes Near the Communications Module for a More Secure Installation
  • New Option for Pluggable Connectors on the Analog Inputs
  • Ferrite Beads Added to Better Separate Logic and Drive Circuits from Noise
  • Migrated to Commonly Available LEDs to Address Supply Chain Limitations
  • 100% Identical Firmware with No Changes for Drop In Replacement Compatibility
  • 99% Identical Shape – Only Slight Changes to Connector Positioning for Better Fit and Finish
  • Now Built by our High-Speed Pick and Place Machine for High-Volume Applications
  • Legacy Status Product – Will Not Become Obsolete
  • Removed Faulty Temperature Sensor from Select Versions due to Errant Readings

Base Station Software

Base Station Software was designed to help you learn the ProXR command set.  Explore ProXR features using our Graphical User Interface.  Watch data bytes flow to and from the board, so you easily understand the command execution process.  There is no faster or easier way to learn how to automate than Base Station, as it was designed to work  with our complete array of communication modules, including Wireless, Ethernet, USB, RS-232, and many more.  You only need a Windows 8 or 10 Computer to Run Base Station.  Base Station was written in Visual Studio, and we even provide the source code to help you on your way! Learn More about Base Station Software Here.

Base Station Software Controlling NCD Relay Controllers
Base Station Software Controlling NCD Relay Controllers

AD8 8-Channel 8/10-Bit Analog to Digital Converters

ProXR ADC
ProXR Analog to Digital Inputs are used to Read External Sensors or Manually Control On-Board Relays

This controller is equipped with 8-Channels of 8/10-Bit Analog to Digital Converters, capable of reading analog voltages from 0 to 5 Volts DC.  The ADCs on this controller allow monitoring of external sensors or contact closure input detection.  Connect external temperature sensors, light sensors, current sensors, buttons, switches, or anything else that generates a 0-5VDC analog or contact closure output.  With 8-bit resolution, analog inputs will convert 0-5 Volt signals into a value from 0 to 255.  With 10-bit resolution, values of 0 to 1023 may be measured.  Input resolution is software selected.  Simply ask the controller for the analog value of each input, and the controller instantly responds.

Relay Activator and Analog Inputs

The Relay Activator control panel allows analog inputs to directly control relays.  Simply connect the analog inputs to buttons or switches and trigger basic relay on or off functions to take manual control of the on-board relays.  The Relay Activator control panel allows you to define 8 functions for each of the 8 inputs.  Functions include turning relays on or off, toggling the state of relays, momentarily flash a relay, momentarily toggle the flashing function of a relay, turn all relays on, turn all relays off, and push notification events.  When push notification events are configured, the controller generates a packet of data every time the inputs change state.

Use the Relay Activator to Configure Analog Inputs for Direct Control of Relays
Use the Relay Activator to Configure Analog Inputs for Direct Control of Relays

Learn More about ProXR Series Controllers

Base Station helps you learn how to use ProXR Series relay controllers.  In this video, we will cover some of the most commonly used features.

Download Base Station

Download the Latest Version of Base Station and Source Code for Visual Studio.

ProXR Quick Start Guide

Online Manual for ProXR and ProXR Lite Series Controllers

Good to Know!

NCD ProXR Series Controllers have been in production for many years and have amassed a large user base since their initial release in the early 2000s. Due to the large client base, we have no plans to discontinue this line of products. In many cases, we are upgrading these devices to make them compatible with automated assembly processes along with improved driver and power electronics capable of supporting many communication technology changes well into the future. Rest assured, ProXR will continue to be a stable part of our product line for many years to come. ProXR series controllers manufactured with a Black circuit board have been migrated to automated assembly and are considered to be the final iteration of this product. These devices can be manufactured in high volumes in a much shorter period of time.

LabVIEW Relay Control

LabVIEW ProXR Relay Drivers
ProXR Analog to Digital Inputs are used to Read External Sensors or Manually Control On-Board Relays

NCD supports integration of NCD relay controllers using LabVIEW.  We have included samples and drivers for basic and advanced operation which cover most functions including Relay Timers.  We have posted several tutorials on this topic here.

ProXR Lite Communication Options

We take communications seriously, as we believe in modular communications and firmware that properly supports scalability into future interface technologies.  ProXR controllers support API communications, which effectively wrap every command with a header, payload, and checksum to ensure reliability.  NCD API commands increase processing speed because no serial timeout is required prior to command processing.  NCD API commands increase reliability, as only a proper checksum will authenticate a command and allow it to process.  When we first implemented API, internet communications via a TCP/IP socket could be realized because the timing problems of internet communications were eliminated.  While API is optional, it is strongly advised.  Our Base Station software uses API communications, so it’s possible to control a ProXR controller over the internet after configuring port forwarding on your router.

ProXR series controllers are the world’s most adaptable controllers, capable of communicating with a wide variety of communication options.  Pick any of your favorite communication technologies: Bluetooth, USB, WiFi, Ethernet, Key Fob, RS-485 or RS-232. ProXR easily adapts to the communication technologies you need most.  We are committed to modular communications, so your ProXR series controllers can easily be retrofitted for other applications as your needs change.  ProXR controllers are never obsolete, as we are actively releasing new communication technologies that greatly enhance the connectivity of our ProXR series controllers.


Communications Module Included


WiFi Bluetooth USB 3 in 1 Module with MQTT Support

Control NCD devices using standard WiFi TCP/IP communications or use the integrated Bluetooth for simple wireless computer to device interface using a wireless virtual COM port.  Use the USB port for control over a virtual COM port for easy connectivity.  This is a low-cost solution that lets you try different solutions with easy setup using a integrated Web Page User Interface for all Configuration settings.  Connect to a MQTT Server over WiFi for remote operation over the internet.  Learn More about our WiFi TCP/IP Communications module here.

Bluetooth

Using the Bluetooth SPP Profile, this device will connect to your PC using Bluetooth, Appearing as a Virtual COM Port. Communicate with this Device up to 200 Feet away!

WiFi

Use the Integrated Web Page to Configure Vital Settings and Use TCP Communications to Communicate to the Device using Simple Byte Packets. A integrated Relay Control Web Page is Available for Select NCD Relay Controllers.

USB

Using the USB interface, this Device will Plug into your PC, MAC, or Linux system and install a Virtual COM Port Driver

MQTT and Amazon AWS Connectivity

Connect Directly to MQTT Servers including Amazon AWS and communicate with this device from anywhere in the world.  Subscribe to a Topic that contains control bytes to control the connected device.  Response bytes from the connected device will be Published to the Cloud.

TCP Communications and UDP

This Communications Module sends UDP Broadcasts to help locate the IP address of the WiFi module on your Network.  Once discovered, simply open port 2101 and send and receive bytes of data to control the connected device and read responses over a WiFi network.

Relay Options


20A_spdt_relay

20-Amp SPDT High Power Relay Option

This controller is available with a 20-Amp relay option, allowing control of high-power loads up to an absolute maximum of 240VAC at 20 Amps. Ideal for high-power switching applications, this relay should never be used for low-power signals. The 20-Amp relay is of the SPDT variety, which provides Common (C), Normally Open (NO), and Normally Closed (NC) connections. Common is connected to NC when the relay is off. Common disconnects from NC and connects to NO when the relay is activated.  This relay is Rated at 20-Amps between NO and C.  Do not exceed 10-Amps between C and NC connections.  This relay uses .250″ Quick Connect terminals (optional accessory) to connect to the top side of the relay. The relay is molded with COM, NC, and NO markings into the plastic. Review Datasheet

30A_SPST_relay

30-Amp SPST High Power Relay Option

This controller is available with a 30-Amp relay option, allowing control of high-power loads up to an absolute maximum of 240VAC at 30 Amps.  Ideal for high-power switching applications, this relay should never be used for low-power signals.  The 30-Amp relay is of the SPST variety, which provides Common (C) and Normally Open (NO) connections.  Common has no connection when the relay is off.  Common connects to NO when the relay is activated.  This relay uses .250″ Quick Connect terminals (optional accessory) to connect to the top side of the relay.  The relay is molded with COM, NO markings into the plastic. Review Datasheet

Compatibility

AD8 Analog Input Usage Notice

Analog Inputs should not have a voltage present when powered down.  Use a 220 Ohm current limiting resistor on each input to prevent damage to the controller if voltage will be present on the analog input when this controller is powered down.  Do not exceed 0 to 5VDC on any analog input or the on-board CPU will be damaged.  Most analog inputs include a 10K Pull Up/Down resistor to help keep the inputs quiet when not in use.  This 10K resistor may slightly bias the readings of some sensors.

Resources

Essential

Documentation

Communications

Tutorials

LabView Tutorials

Official Repository

Drawings

Wiring Diagrams

Click to Enlarge
Click to Enlarge
Click to Enlarge
Click to Enlarge
Click to Enlarge
Click to Enlarge

Videos

WiFi Module Setup

The Wi-Fi Communications Module must be configured in order to connect to your network using the Wi-Fi Configuration Kit. The Wi-Fi Configuration Kit consists of a small black board with 3 LEDs. The Configuration Board will be labeled ZIGMO. The module may have to be removed from the board and plugged into the ZIGMO as shown. The ZIGMO will plug into the USB port of your computer for configuration and some USB drivers may need to be installed on your computer. ...

The Wi-Fi Communications Module must be configured in order to connect to your network using the Wi-Fi Configuration Kit. The Wi-Fi Configuration Kit consists of a small black board with 3 LEDs. The Configuration Board will be labeled ZIGMO. The module may have to be removed from the board and plugged into the ZIGMO as shown. The ZIGMO will plug into the USB port of your computer for configuration and some USB drivers may need to be installed on your computer. Base Station software is required to configure the Wi-Fi communications module and is available as a free download. This software identifies compatible Wi-Fi routers in your area and assigns the router you have chosen to the Wi-Fi communications module. Network security options may be configured using this software including passwords. You can find the NCD Base Station Software at ncd.io/start.

See More

WiFi Introduction

Introduction to our WiFi Module and technologies. Learn the advantages, disadvantages as well as tips and tricks for using WiFi Relay Controllers available from store.ncd.io. You can find more in depth information on how to use and configure your WiFi Relay Controller at https://ncd.io/wifi-module-quick-start-guide/.

Introduction to our WiFi Module and technologies. Learn the advantages, disadvantages as well as tips and tricks for using WiFi Relay Controllers available from store.ncd.io. You can find more in depth information on how to use and configure your WiFi Relay Controller at https://ncd.io/wifi-module-quick-start-guide/.

See More

Analog to Digital Converter Introduction

Learn the Basics of Analog to Digital Conversion. Many of our boards have analog to digital inputs directly on the board. These ADC inputs are great for monitoring sensors and controlling relays from software based on these sensor readings. This video will show you how, why, and when to use them.  

Learn the Basics of Analog to Digital Conversion. Many of our boards have analog to digital inputs directly on the board. These ADC inputs are great for monitoring sensors and controlling relays from software based on these sensor readings. This video will show you how, why, and when to use them.  

See More

Introduction to Relay Control

This video will guide you in determining which relay controller you need for your application as well as a general overview of the differences between Relay Options. If you're new to our products or just need a refresher for a new application this is a great place to start.

This video will guide you in determining which relay controller you need for your application as well as a general overview of the differences between Relay Options. If you're new to our products or just need a refresher for a new application this is a great place to start.

See More

Induction Suppression

Learn about Induction and how it comes into play with Relay Controllers. Induction suppression can make your Relay Control applications intermittent and unreliable. This video will show you what causes it, how to avoid it, and how to account for it in your application.

Learn about Induction and how it comes into play with Relay Controllers. Induction suppression can make your Relay Control applications intermittent and unreliable. This video will show you what causes it, how to avoid it, and how to account for it in your application.

See More

Buy Now

This product qualifies for:

  • Forum Support (fastest)
  • Direct Email Support
  • Scheduled Phone Support

Standard Lead Times

Standard lead times are 3-5 business days as we manufacture and test the product at the time of order. Larger orders may require additional time.

Product Identification
SKU: PL_WIFI_2030
UPC: 689860072350
Country of Origin: US
HTS Code: 854231
1+ Pieces
$142.00/ea
10+ Pieces
$136.32/ea
25+ Pieces
$133.48/ea
100+ Pieces
$124.96/ea

High Power ProXR Lite Relay ControllersChange

Would you like a power supply?Change

NCD Controllers Need Power. Standard NCD Power Supplies use a 2.1mm Barrel Connector with 12VDC (center positive) rated at 1.25 Amps (minimum).


Customize

We Customize Just for You!!

NCD offers many custom IoT electronic design services to help tailor our product to your exact needs.  Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.

Custom IoT Electronic Design Services Process

Most of our users purchase off-the-shelf hardware for initial testing.  Once everything is working, they contact us to build a custom solution which may include specialized changes to the board, firmware, connectors, etc.  Custom boards have many advantages such as reduced wiring, easy installation, small size, less power consumption, and in some cases, an overall reduction in product cost.  Custom IoT Electronic Design Services will have your company name and logo on the board as well as the enclosure.

Customized IoT Electronics

NCD engineers can help build a customized solution for your particular application based on the designs you see on our website.  We can combine devices onto a single board, change the shape, or even some of the components to meet your exact needs.  We also provide turn-key metal enclosures with powder coating and full-color printing on the top side starting at just $500 for setup!  We have more than 20 years of experience in electronics design and manufacturing.  All of our products are designed and manufactured in the USA, so we are here to support the products we make.  We only ask that our customers prototype their needs using our existing products before we customize.

Customization Guidelines

  • Custom designs should be based on our existing product because we can’t build rockets or electric cars over here!
  • We do not provide customization services if it involves the introduction of a new or untested technology.
  • Custom engineering fees depend on your requirements, so please contact us for a quote!
  • We maintain ownership of all designs, including our customized designs as they are based on our existing Design.
  • We will only ship the customized product to you or your authorized agents.
  • We have an NDA available if needed.
  • The turn-around time is about 2-3 weeks.
  • We specialize in low-volume designs, no quantity is too small!
  • We have the ability to scale to large volumes as needed.

Getting Started with Product Customization

All you have to do is contact us and we will walk you through the process from beginning to end, based on your individual needs.  Some people are surprised at how fast we finish CAD design (usually a few hours), but keep in mind, we still have to build your design, which takes considerably more time.  When we customize product, here are the general services we provide:

  • We design the circuit board.
  • We communicate with our customers throughout the customization and manufacturing process.
  • We manufacture surface mount stencils and circuit boards.
  • We program our pick and place machines to build your boards.
  • We build a working sample and run it through our wave solder machine.
  • We test your custom IoT solution.
  • Once the design is finalized it won’t be possible to make changes during production (changes cost money and require us to repeat the above processes)
  • Once it meets all your requirements, we will start production as needed.
  • We work with our metal fabricators to design a metal enclosure if required.
  • You work with our artist to print the top side of the enclosure in full color with your company logo if required.

+MORE App customizations

We partnered with Blynk who have developed the +MORE app.  If you are interested in customization to their +MORE app then we're sure you will enjoy working with them as much as we did.  They can customize the user interface +MORE mobile app at your request.

  • Add new functionality and features to the mobile applications and web dashboard
  • Change/ add data visualizations options

Contact them today for custom App Development!

White-labeled mobile apps and dashboard

Blynk the developer of +MORE has a fantastic team of developers eager to help with your IoT applications.  They offer the following services.

We provide white-label IoT infrastructure:

  • Private IoT cloud
  • Branded mobile applications for remote monitoring and control
  • A branded web dashboard to manage fleet of your devices
  • Big Data analysis with actionable insights
  • Development of machine learning algorithms

Contact them today for all of your IoT cloud needs!

©2019 National Control Devices, LLC

ncd.io

Made in the USA
5 Year Warranty
Free Shipping on orders over $100
Free Shipping on orders over $100

To learn something new, take the path that you took yesterday. ~John Burroughs

Log in with your credentials

or    

Forgot your details?

Create Account