8-Channel Push Notification Contact Closure Input over WiFi or Bluetooth
Please note that images above may contain product not included with purchase.
Highlights
- Sends WiFi Push Notification on Sensor Change
- Communicates Push Notification Data over WiFi Bluetooth or USB
- 8-Channel Contact Closure Inputs with Screw-Terminals
- Contact Closure Input and CPU Busy/Ready Status LEDs
- 12VDC Operation with 2.1mm Barrel Connector or Terminal Block
- Compatible with any Contact Closure Sensor
- Send Push Notifications to a Specific Server or All Devices over a Local Network
- Read and React to Push Notifications from Server Software
- Compatible with N-Button Software for Easy Automation
- Compatible with TCP or UDP Protocols
- Eight User-Defined Bytes in Data Transmission
Push notification controllers can be used to send messages through standard communications protocols to computers for intelligent process. Use Push Notification controllers generate a packet of bytes when contact closure inputs are detected.
NCD WiFi Push Notification devices generate a TCP/IP data packet when a change on any of the contact closure inputs is detected. Push Notification devices send data indicating the on/off status of all inputs. The inputs on this controller were designed for contact closure interface applications. Connect the inputs via screw terminals to buttons, switches, magnetic door switches, or any other contact-closure source. NCD Push Notification devices are powered from a 12VDC power supply using a 2.1mm barrel connector or a 2-position screw terminal. On-Board LEDs display communication activity and CPU Busy/Ready status.
Using this device is very easy. Simply connect to using Comm Operator (included with Base Station) or other TCP/IP data monitoring utility. Connect a button or switch between Ground and Input 1 and watch the data arrive in your terminal software. Every time the button is pressed or released, a data frame is generated that includes a byte of data representing the status of all available inputs.
Push Notification – Real Data in Real Time
Flip a switch and send a SMS Text Message. Push a Button and Send an email. Trip a sensor and send a message to a server to do just about anything you want. Log when sensors change state or control relays when switches are triggered from distant locations. Push Notification series controllers are the easiest way to send alerts to computers when a switch changes state. The Push Notification series will let you know when a door is opened, a switch is flipped, or motion is detected.
Dry Contact-Closure Inputs
The Inputs on the Push Notification series controllers are compatible with any type of switch, including momentary buttons, toggle switches, motion detectors, magnet sensors, level switches, float switches, break-beam detectors, door sensors, window sensors, glass-breakage detectors, vehicle sensors, fire detectors, gas sensors, and much more.
Push Notification for the Real World
Using float sensors, Push Notification series controllers can send you a SMS text message if water levels rise too high. Alert emergency responders if fire or gas is detected. Receive instant SMS and email notification if security sensors are triggered. Log sensor activity for scientific, accountability, or security applications. Monitor, React, and Log sensor data as soon as the sensor detects a change. Push Notification series controllers are built to help you stay connected to your world wherever you are.
Direct Wired Connection – Fast and Reliable
The Push Notification Series will let you send contact closure sensor data directly to a local computer. From there the data can be used to activate relays, log data, trigger applications, forward data and much more. Monitor your world in real time.
How It Works
NCD Push Notification series controllers use contact-closure input detection to automatically forwards sensor data to an attached computer. Push Notification controllers do not directly generate Emails or SMS text messages. Optional N-Button software or custom-developed server software is required for this functionality. The Push Notification Quick Start Guide will help you setup your Push Notification Controller for your particular application.
Combine with N-Button
We STRONGLY recommend the use of optional N-Button software in combination with the purchase of Push Notification series controllers. N-Button software is a complete automation software application capable of sending SMS and Email messages, making decisions, controlling relays, and much more. The N-Button development team has been developing automation software for our devices for many years. N-Button is available as an optional upgrade when you add any Push Notification controller to your shopping cart. N-Button is compatible with Windows 8 or later operating systems.
Write Custom Software
You can write your own custom software to work with NCD Push Notification controllers. Our products operate using standard protocols, making software integration easy for developers. We help you eliminate the hardware development cycle by providing you with a plug and play solution.
User Configurable Bytes
Push Notification series devices allow you to customize 8 bytes in the data packet. Use these data bytes to indicate location, sensor type, or as a security id. Use our Base Station Software (free) to configure optional data bytes.
Communications Module Included
WiFi Bluetooth USB 3 in 1 Module with MQTT Support
Control NCD devices using standard WiFi TCP/IP communications or use the integrated Bluetooth for simple wireless computer to device interface using a wireless virtual COM port. Use the USB port for control over a virtual COM port for easy connectivity. This is a low-cost solution that lets you try different solutions with easy setup using a integrated Web Page User Interface for all Configuration settings. Connect to a MQTT Server over WiFi for remote operation over the internet. Learn More about our WiFi TCP/IP Communications module here.
Bluetooth
Using the Bluetooth SPP Profile, this device will connect to your PC using Bluetooth, Appearing as a Virtual COM Port. Communicate with this Device up to 200 Feet away!
WiFi
Use the Integrated Web Page to Configure Vital Settings and Use TCP Communications to Communicate to the Device using Simple Byte Packets. A integrated Relay Control Web Page is Available for Select NCD Relay Controllers.
USB
Using the USB interface, this Device will Plug into your PC, MAC, or Linux system and install a Virtual COM Port Driver
MQTT and Amazon AWS Connectivity
Connect Directly to MQTT Servers including Amazon AWS and communicate with this device from anywhere in the world. Subscribe to a Topic that contains control bytes to control the connected device. Response bytes from the connected device will be Published to the Cloud.
TCP Communications and UDP
This Communications Module sends UDP Broadcasts to help locate the IP address of the WiFi module on your Network. Once discovered, simply open port 2101 and send and receive bytes of data to control the connected device and read responses over a WiFi network.
Mechanical Drawing
Wiring Diagrams
Communications
- NexGen WiFi Module User Guide
- (Deprecated – Legacy Hardware) WiFi Communications Module Quick Start Guide
Tutorials
- Benefits of Wireless Door Open Closed Sensors Monitoring System
- Efficiency and Control: Leveraging Contact Closure Push Notification for Industrial Access Management
- Effective Facilities Management with Contact Closure Push Notification Systems
- Linux Relay Controller using Netcat for Ethernet and WiFi
Download NCD Base Station
Push Notification Network
WiFi Module Setup
The Wi-Fi Communications Module must be configured in order to connect to your network using the Wi-Fi Configuration Kit. The Wi-Fi Configuration Kit consists of a small black board with 3 LEDs. The Configuration Board will be labeled ZIGMO. The module may have to be removed from the board and plugged into the ZIGMO as shown. The ZIGMO will plug into the USB port of your computer for configuration and some USB drivers may need to be installed on your computer. Base Station software is required to configure the Wi-Fi communications module and is available as a free download. This software identifies compatible Wi-Fi routers in your area and assigns the router you have chosen to the Wi-Fi communications module. Network security options may be configured using this software including passwords. You can find the NCD Base Station Software at ncd.io/start.
WiFi Introduction
Introduction to our WiFi Module and technologies. Learn the advantages, disadvantages as well as tips and tricks for using WiFi Relay Controllers available from store.ncd.io. You can find more in depth information on how to use and configure your WiFi Relay Controller at https://ncd.io/wifi-module-quick-start-guide/.