Attention - INTERNATIONAL customers, USPS shipping services, including Express Mail continue to experience extended service delays.
We STRONGLY advise shipping using UPS for all URGENT orders. Click on the link to set up freight collect options for your account. Dismiss

You are using an unsupported browser!

Please upgrade your version of IE to at least 9, or use a modern browser such as Chrome or Firefox.

Features

  • Sends WiFi Push Notification on Sensor Change
  • Communicates Push Notification Data over WiFi Bluetooth or USB
  • 2-Channel Contact Closure Inputs with Screw-Terminals
  • Contact Closure Input and CPU Busy/Ready Status LEDs
  • 12VDC Operation with 2.1mm Barrel Connector or Terminal Block
  • Compatible with any Contact Closure Sensor
  • Send Push Notifications to a Specific Server or All Devices over a Local Network
  • Read and React to Push Notifications from Server Software
  • Compatible with N-Button Software for Easy Automation
  • Compatible with TCP or UDP Protocols
  • Eight User-Defined Bytes in Data Transmission

$132.00

SKU: PR60-10_MIRCC2_WIFI UPC: 689860069886 Categories: , , ,

Description

Push notification controllers can be used to send messages through standard communications protocols to computers for intelligent process.  Use Push Notification controllers generate a packet of bytes when contact closure inputs are detected.

NCD WiFi Push Notification devices generate a TCP/IP data packet when a change on any of the contact closure inputs is detected.  Push Notification devices send data indicating the on/off status of all inputs.  The inputs on this controller were designed for contact closure interface applications.  Connect the inputs via screw terminals to buttons, switches, magnetic door switches, or any other contact-closure source.  NCD Push Notification devices are powered from a 12VDC power supply using a 2.1mm barrel connector or a 2-position screw terminal.  On-Board LEDs display communication activity and CPU Busy/Ready status.

Using this device is very easy.  Simply connect to using Comm Operator (included with Base Station) or other TCP/IP data monitoring utility.  Connect a button or switch between Ground and Input 1 and watch the data arrive in your terminal software.  Every time the button is pressed or released, a data frame is generated that includes a byte of data representing the status of all available inputs.

Because this device uses our new WiFi Communications Module, Push Notification data may also be sent over Bluetooth using the Bluetooth Serial Port Profile (SPP) Driver.  Simply open the wireless Virtual COM port over Bluetooth and start receiving bytes of data when any input changes state.  Our new WiFi communications module also supports USB communications, transmitting Push Notification data to your PC using a USB Virtual COM port.

Push Notification – Real Data in Real Time

Flip a switch and send a SMS Text Message. Push a Button and Send an email. Trip a sensor and send a message to a server to do just about anything you want. Log when sensors change state or control relays when switches are triggered from distant locations.  Push Notification series controllers are the easiest way to send alerts to computers when a switch changes state. The Push Notification series will let you know when a door is opened, a switch is flipped, or motion is detected.

Dry Contact-Closure Inputs

The Inputs on the Push Notification series controllers are compatible with any type of switch, including momentary buttons, toggle switches, motion detectors, magnet sensors, level switches, float switches, break-beam detectors, door sensors, window sensors, glass-breakage detectors, vehicle sensors, fire detectors, gas sensors, and much more.

Push Notification for the Real World

Using float sensors, Push Notification series controllers can send you a SMS text message if water levels rise too high. Alert emergency responders if fire or gas is detected. Receive instant SMS and email notification if security sensors are triggered. Log sensor activity for scientific, accountability, or security applications. Monitor, React, and Log sensor data as soon as the sensor detects a change. Push Notification series controllers are built to help you stay connected to your world wherever you are.

Direct Wired Connection – Fast and Reliable

The Push Notification Series will let you send contact closure sensor data directly to a local computer. From there the data can be used to activate relays, log data, trigger applications, forward data and much more. Monitor your world in real time.

How It Works

NCD Push Notification series controllers use contact-closure input detection to automatically forwards sensor data to an attached computer. Push Notification controllers do not directly generate Emails or SMS text messages. Optional N-Button software or custom-developed server software is required for this functionality. The Push Notification Quick Start Guide will help you setup your Push Notification Controller for your particular application.

Combine with N-Button

We STRONGLY recommend the use of optional N-Button software in combination with the purchase of Push Notification series controllers. N-Button software is a complete automation software application capable of sending SMS and Email messages, making decisions, controlling relays, and much more. The N-Button development team has been developing automation software for our devices for many years. N-Button is available as an optional upgrade when you add any Push Notification controller to your shopping cart. N-Button is compatible with Windows 8 or later operating systems.

Write Custom Software

You can write your own custom software to work with NCD Push Notification controllers.  Our products operate using standard protocols, making software integration easy for developers.  We help you eliminate the hardware development cycle by providing you with a plug and play solution.

User Configurable Bytes

Push Notification series devices allow you to customize 8 bytes in the data packet. Use these data bytes to indicate location, sensor type, or as a security id. Use our Base Station Software (free) to configure optional data bytes.


Communications Module Included


WiFi Bluetooth USB 3 in 1 Module with MQTT Support

Control NCD devices using standard WiFi TCP/IP communications or use the integrated Bluetooth for simple wireless computer to device interface using a wireless virtual COM port.  Use the USB port for control over a virtual COM port for easy connectivity.  This is a low-cost solution that lets you try different solutions with easy setup using a integrated Web Page User Interface for all Configuration settings.  Connect to a MQTT Server over WiFi for remote operation over the internet.  Learn More about our WiFi TCP/IP Communications module here.

Bluetooth

Using the Bluetooth SPP Profile, this device will connect to your PC using Bluetooth, Appearing as a Virtual COM Port. Communicate with this Device up to 200 Feet away!

WiFi

Use the Integrated Web Page to Configure Vital Settings and Use TCP Communications to Communicate to the Device using Simple Byte Packets. A integrated Relay Control Web Page is Available for Select NCD Relay Controllers.

USB

Using the USB interface, this Device will Plug into your PC, MAC, or Linux system and install a Virtual COM Port Driver

MQTT and Amazon AWS Connectivity

Connect Directly to MQTT Servers including Amazon AWS and communicate with this device from anywhere in the world.  Subscribe to a Topic that contains control bytes to control the connected device.  Response bytes from the connected device will be Published to the Cloud.

TCP Communications and UDP

This Communications Module sends UDP Broadcasts to help locate the IP address of the WiFi module on your Network.  Once discovered, simply open port 2101 and send and receive bytes of data to control the connected device and read responses over a WiFi network.

Resources

Communications

Tutorials

Download NCD Base Station

Drawings

Wiring Diagrams

Click to Enlarge

Videos

WiFi Module Setup

The Wi-Fi Communications Module must be configured in order to connect to your network using the Wi-Fi Configuration Kit. The Wi-Fi Configuration Kit consists of a small black board with 3 LEDs. The Configuration Board will be labeled ZIGMO. The module may have to be removed from the board and plugged into the ZIGMO as shown. The ZIGMO will plug into the USB port of your computer for configuration and some USB drivers may need to be installed on your computer. ...

The Wi-Fi Communications Module must be configured in order to connect to your network using the Wi-Fi Configuration Kit. The Wi-Fi Configuration Kit consists of a small black board with 3 LEDs. The Configuration Board will be labeled ZIGMO. The module may have to be removed from the board and plugged into the ZIGMO as shown. The ZIGMO will plug into the USB port of your computer for configuration and some USB drivers may need to be installed on your computer. Base Station software is required to configure the Wi-Fi communications module and is available as a free download. This software identifies compatible Wi-Fi routers in your area and assigns the router you have chosen to the Wi-Fi communications module. Network security options may be configured using this software including passwords. You can find the NCD Base Station Software at ncd.io/start.

See More

WiFi Introduction

Introduction to our WiFi Module and technologies. Learn the advantages, disadvantages as well as tips and tricks for using WiFi Relay Controllers available from store.ncd.io. You can find more in depth information on how to use and configure your WiFi Relay Controller at https://ncd.io/wifi-module-quick-start-guide/.

Introduction to our WiFi Module and technologies. Learn the advantages, disadvantages as well as tips and tricks for using WiFi Relay Controllers available from store.ncd.io. You can find more in depth information on how to use and configure your WiFi Relay Controller at https://ncd.io/wifi-module-quick-start-guide/.

See More

Buy Now

This product qualifies for:

  • Forum Support (fastest)
  • Direct Email Support
  • Scheduled Phone Support

Standard Lead Times

Standard lead times are 3-5 business days as we manufacture and test the product at the time of order. Larger orders may require additional time.

Product Identification
SKU: PR60-10_MIRCC2_WIFI
UPC: 689860069886
Country of Origin: US
HTS Code: 854231
1+ Pieces
$132.00/ea
10+ Pieces
$126.72/ea
25+ Pieces
$124.08/ea
100+ Pieces
$116.16/ea

Wireless Configuration KitChange

Configure Wireless Modules using our Wireless Configuration Kit. Use this kit to connect WiFi modules to your network, or to update settings stored inside your wireless communications module.

Would you like a power supply?Change

NCD Controllers Need Power. Standard NCD Power Supplies use a 2.1mm Barrel Connector with 12VDC (center positive) rated at 1.25 Amps (minimum).

Would you Like N-Button Software?Change

N-Button software allows you to configure buttons and widgets to control relays and read the status of relays without programming. Use N-Button to configure simple automation tasks, read analog inputs, and more.  Customize the user-interface with meters, buttons, and much more.


Customize

We Customize Just for You!!

NCD offers many custom IoT electronic design services to help tailor our product to your exact needs.  Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.

Custom IoT Electronic Design Services Process

Most of our users purchase off-the-shelf hardware for initial testing.  Once everything is working, they contact us to build a custom solution which may include specialized changes to the board, firmware, connectors, etc.  Custom boards have many advantages such as reduced wiring, easy installation, small size, less power consumption, and in some cases, an overall reduction in product cost.  Custom IoT Electronic Design Services will have your company name and logo on the board as well as the enclosure.

Customized IoT Electronics

NCD engineers can help build a customized solution for your particular application based on the designs you see on our website.  We can combine devices onto a single board, change the shape, or even some of the components to meet your exact needs.  We also provide turn-key metal enclosures with powder coating and full-color printing on the top side starting at just $500 for setup!  We have more than 20 years of experience in electronics design and manufacturing.  All of our products are designed and manufactured in the USA, so we are here to support the products we make.  We only ask that our customers prototype their needs using our existing products before we customize.

Customization Guidelines

  • Custom designs should be based on our existing product because we can’t build rockets or electric cars over here!
  • We do not provide customization services if it involves the introduction of a new or untested technology.
  • Custom engineering fees depend on your requirements, so please contact us for a quote!
  • We maintain ownership of all designs, including our customized designs as they are based on our existing Design.
  • We will only ship the customized product to you or your authorized agents.
  • We have an NDA available if needed.
  • The turn-around time is about 2-3 weeks.
  • We specialize in low-volume designs, no quantity is too small!
  • We have the ability to scale to large volumes as needed.

Getting Started with Product Customization

All you have to do is contact us and we will walk you through the process from beginning to end, based on your individual needs.  Some people are surprised at how fast we finish CAD design (usually a few hours), but keep in mind, we still have to build your design, which takes considerably more time.  When we customize product, here are the general services we provide:

  • We design the circuit board.
  • We communicate with our customers throughout the customization and manufacturing process.
  • We manufacture surface mount stencils and circuit boards.
  • We program our pick and place machines to build your boards.
  • We build a working sample and run it through our wave solder machine.
  • We test your custom IoT solution.
  • Once the design is finalized it won’t be possible to make changes during production (changes cost money and require us to repeat the above processes)
  • Once it meets all your requirements, we will start production as needed.
  • We work with our metal fabricators to design a metal enclosure if required.
  • You work with our artist to print the top side of the enclosure in full color with your company logo if required.

+MORE App customizations

We partnered with Blynk who have developed the +MORE app.  If you are interested in customization to their +MORE app then we're sure you will enjoy working with them as much as we did.  They can customize the user interface +MORE mobile app at your request.

  • Add new functionality and features to the mobile applications and web dashboard
  • Change/ add data visualizations options

Contact them today for custom App Development!

White-labeled mobile apps and dashboard

Blynk the developer of +MORE has a fantastic team of developers eager to help with your IoT applications.  They offer the following services.

We provide white-label IoT infrastructure:

  • Private IoT cloud
  • Branded mobile applications for remote monitoring and control
  • A branded web dashboard to manage fleet of your devices
  • Big Data analysis with actionable insights
  • Development of machine learning algorithms

Contact them today for all of your IoT cloud needs!

©2019 National Control Devices, LLC

ncd.io

Made in the USA
5 Year Warranty
Free Shipping on orders over $100
Free Shipping on orders over $100

To learn something new, take the path that you took yesterday. ~John Burroughs

Log in with your credentials

or    

Forgot your details?

Create Account