Due to a high volume of orders, lead times to fulfill new orders will be two weeks. Dismiss

You are using an unsupported browser!

Please upgrade your version of IE to at least 9, or use a modern browser such as Chrome or Firefox.

Features

  • Industrial Grade 1 Channel Analog to Digital Converter
  • Max Voltage Input 10V
  • 10 bit Resolution with ±2 LSB Absolute Accuracy
  • Auto ADC sample transmission on analog voltage change detection every 7 seconds (factory configurable duration)
  • 10% Analog voltage change detection (factory configurable percentage)
  • 2 Mile Range with On-Board Antenna
  • Superior LOS Range of up to 28 miles with High-Gain Antennas
  • Interface to Raspberry Pi, Microsoft Azure, Arduino and More
  • Example Software for Visual Studio and LabVIEW
  • Wireless Mesh Networking using DigiMesh®
  • 256 Sensor Node per Network
  • Factory Default Option using combination of hardware buttons
  • Power efficient Built-in Sleep mode
    • User Configurable Sleep duration
    • Up to 500,000 Transmissions from 2 AA Batteries
  • Real time battery status

$169.95

SKU: PR52-10 UPC: 689860069947 Categories: ,

Description

IoT Long Range Wireless DC Voltage Monitor(0-10V)

Our long range wireless enterprise series sensors are an easy to use and reliable start to any data aggregation application. This video will demonstrate how they work, what they do, and how to use them.

Long Range IoT Wireless DC Voltage Monitor(0-10V)

Introducing NCD’s Long Range IoT Wireless DC Voltage Monitor Analog to Digital Converter (ADC), boasting up to a 28 Mile range using a wireless mesh networking architecture.  It incorporates a 1 channel 10 bit ADC that samples analog inputs at user defined intervals while sleeping during the time it is not sending data to minimize power consumption. This Wireless DC Voltage Monitor Can measure upto 10V DC voltage input. This IoT Wireless DC Voltage Monitor has an additional feature of detecting change in voltage every 7 seconds (factory configurable) and sending out ADC samples if the change in voltage on any channel is greater than 10% (factory configurable). To minimize power consumption, it sleeps during the time it is not checking for change in analog voltage. Both of these features work in parallel to support multiple application areas in one package.

Powered by just 2 AA batteries and an operational lifetime of 500,000 wireless transmissions, a 10 years battery life can be expected depending on environmental conditions and the data transmission interval.  Optionally, this sensor may be externally powered.

With an open communication protocol this sensor can be integrated with just about any control system or gateway.  Data can be transmitted to a PC, a Raspberry Pi, to Microsoft Azure® IoT, or Arduino. Sensor parameters and wireless transmission settings can be changed on the go using the open communication protocol providing maximum configurability depending on the intended application.

The long range, price, accuracy, battery life and security features of Long Range IoT Wireless 0-10V ADC makes it an affordable choice which exceeds the requirements for most of the industrial as well as consumer market applications.

Receiving Data From Long Range IoT Wireless 0-10V Analog To Digital Converter

This IoT Wireless DC Voltage Monitor Analog to Digital Converter device sends data periodically, based on user-preset timing intervals and on Certain % change on the inputs.  Data transmissions include battery level, signal strength, payload, firmware version, sensor type, and device serial number.  Please see the Resources section to see detailed information on the data structure of this device.  This wireless transmitter needs a receiver.  There are many options available for receiving data from NCD transmitters.  We highly recommend using our USB Modem (available during purchase) so you can monitor this device and use our LabVIEW software for changing device settings.  Using our long-range USB wireless modem, users can expect easy operation over a virtual COM port at 115.2K baud.  Optionally, we offer a Wireless receiver that operates over ethernet.  Data from NCD sensors will appear over TCP/IP on port 2101.  Simply open a TCP/IP socket, port 2101, to the IP address of the Ethernet modem and see your data stream in to your local area network.  We take software samples seriously!  Be sure to to check out the resources section of our web site to see code samples for Raspberry Pi, Visual Studio, LabVIEW, Arduino, Python, and more.

Now Supporting Microsoft Azure® IoT

We’ve been working with Microsoft engineers to post data from our sensors to Azure®.  If you need help integrating this sensor into Azure®, please let us know and we will work with you to get you connected!

IoT Wireless Analog to Digital Converter

We take software samples seriously!  Be sure to to check out the resources section of our web site to see code samples for Raspberry Pi, Visual Studio, LabVIEW, Arduino, Python, and more.  We can help you post data to your Azure IoT account with some of our tutorials!

Applications:

  1. Resistive Analog Sensor Interface
  2. Wireless 0-10V DC Voltage Monitoring
  3. Piezo Electric, Photo-resistor and Analog Output Sensor Interface
  4. Analog Transducer Interface
  5. Read Sensors Like Force, Strain Gauge, Pressure
  6. Analog Input To Cloud Like AWS/Azure
802.15.4 Module Wireless

900HP-S3B Industrial Wireless Mesh

Long-Range Wireless Mesh networking is our favorite of all wireless communication technologies.  This is the ONLY communications technology NCD recommends on the factory floor, operating at a safe 900MHz.  Mesh technology will hop data from one location to another to reach its intended destination, users do not need to do anything other than make sure wireless modules stay within hopping range of each other.  We use the Digi 900HP-S3B module in our products, as this is the best the industry has to offer.  With a 2 mile range between modules and up to 8 hops, it is possible to cover 16 miles of wireless territory using this technology.  Using high-gain antennas, this module is capable of communicating to a remote module up to 28 miles away.

Compatibility

Not for use in outdoor applications or for use in excessive temperature conditions.  Prolonged freezing will prevent batteries from functioning until thawed, using extended temperature range industrial batteries may improve the useful temperature range.  Extended freezing applications should use a full-time powered solution.  Prolonged exposure to extreme humidity conditions may damage this device.  The sensing element is rated for use for 5 years and may be replaced.  Exposure to high temperatures may cause the batteries to leak, causing permanent damage to this device.  NCD Warranty does not cover battery corrosion or use in excessively smoky environments under any circumstances.

900HP-S3B Wireless Compatibility Notes

When using an 900HP-S3B communication module, it is essential that you use the ZIGMO_PCB to configure the module settings.  Long-Range wireless sensors may be programmed over the air without removing the communications module.

A 900HP-S3B Modem or a gateway of some kind that support the 900HP-S3B communications module will also be required.

Resources

Essential

Mechanical Drawing

Enterprise Solutions

Wiring Diagrams

Click to Enlarge
Click to Enlarge

Buy Now

Product Identification
SKU: PR52-10
UPC: 689860069947
Country of Origin: US
HTS Code: 854231
1+ Pieces
$169.95/ea
10+ Pieces
$163.15/ea
25+ Pieces
$159.75/ea
100+ Pieces
$149.56/ea

Two Magnetic AttachmentsChange

900HP-S3B Long Range Wireless ModemChange

You will need at least one 900HP-S3B Modem to talk to our complete line of 900HP-S3B Wireless Mesh devices.

Antenna Extension CablesChange

Do you need to extend the Antenna? Use Any of these Antenna Extension Cables:


Customize

We Customize Just for You!!

NCD offers many custom IoT electronic design services to help tailor our product to your exact needs.  Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.

Custom IoT Electronic Design Services Process

Most of our users purchase off-the-shelf hardware for initial testing.  Once everything is working, they contact us to build a custom solution which may include specialized changes to the board, firmware, connectors, etc.  Custom boards have many advantages such as reduced wiring, easy installation, small size, less power consumption, and in some cases, an overall reduction in product cost.  Custom IoT Electronic Design Services will have your company name and logo on the board as well as the enclosure.

Customized IoT Electronics

NCD engineers can help build a customized solution for your particular application based on the designs you see on our website.  We can combine devices onto a single board, change the shape, or even some of the components to meet your exact needs.  We also provide turn-key metal enclosures with powder coating and full-color printing on the top side starting at just $500 for setup!  We have more than 20 years of experience in electronics design and manufacturing.  All of our products are designed and manufactured in the USA, so we are here to support the products we make.  We only ask that our customers prototype their needs using our existing products before we customize.

Customization Guidelines

  • Custom designs should be based on our existing product because we can’t build rockets or electric cars over here!
  • We do not provide customization services if it involves the introduction of a new or untested technology.
  • Custom engineering fees depend on your requirements, so please contact us for a quote!
  • We maintain ownership of all designs, including our customized designs as they are based on our existing Design.
  • We will only ship the customized product to you or your authorized agents.
  • We have an NDA available if needed.
  • The turn-around time is about 2-3 weeks.
  • We specialize in low-volume designs, no quantity is too small!
  • We have the ability to scale to large volumes as needed.

Getting Started with Product Customization

All you have to do is contact us and we will walk you through the process from beginning to end, based on your individual needs.  Some people are surprised at how fast we finish CAD design (usually a few hours), but keep in mind, we still have to build your design, which takes considerably more time.  When we customize product, here are the general services we provide:

  • We design the circuit board.
  • We communicate with our customers throughout the customization and manufacturing process.
  • We manufacture surface mount stencils and circuit boards.
  • We program our pick and place machines to build your boards.
  • We build a working sample and run it through our wave solder machine.
  • We test your custom IoT solution.
  • Once the design is finalized it won’t be possible to make changes during production (changes cost money and require us to repeat the above processes)
  • Once it meets all your requirements, we will start production as needed.
  • We work with our metal fabricators to design a metal enclosure if required.
  • You work with our artist to print the top side of the enclosure in full color with your company logo if required.

ControlAnything.com and ControlEverything Site Migration Notes

©2018 National Control Devices, LLC

ncd.io

Made in the USA
5 Year Warranty
Free Shipping on orders over $100
Free Shipping on orders over $100

To learn something new, take the path that you took yesterday. ~John Burroughs

Log in with your credentials

or    

Forgot your details?

Create Account