IoT Long Range Wireless Analog Digital Converter (3.3V)
Please note that images above may contain product not included with purchase.
Highlights
- Industrial Grade 2-Channel Analog to Digital Converter
- 10-bit Resolution
- Auto ADC Sample Transmission on Analog Voltage Change
- Configurable 10% Analog Voltage Change Detection
- 2 Mile Line-of-Sight Range with On-Board Antenna
- Superior LOS Range of up to 28 Miles with High-Gain Antennas
- Interface to Raspberry Pi, Microsoft® Azure®, Losant, and More
- Example Software for Visual Studio and LabVIEW®
- Wireless Mesh Networking using DigiMesh®
- Open Communication Protocol for Easy Software Integration
- Small 3″ x 3″ Form Factor Wireless Analog to Digital Converter
- Power-Efficient Sleep Mode, Up to 10 Year Battery Life
- User Configurable Sleep duration
- Up to 500,000 Transmissions from 2 AA Batteries
- Includes Battery Level with Every Transmission
- Validates and Retries Lost Communication Packets
Retired Notice: This Sensor is Retired
This sensor is currently retired. We don’t recommend this product for new customers. Don’t worry though, we can still make it for you if it’s absolutely required, but minimum purchase quantities of 10 pieces will apply. We may need extra time to get this back into production, please click the “Help” Button in the lower right corner of the screen to contact us. We do have alternative sensors available. The extra batteries and extended battery life in the updated version has been a great benefit to our customers. Please see the updated product below:
h2>Long Range IoT Wireless Analog Digital Converter (3.3V)
Introducing NCD’s Long Range IoT Wireless Analog to Digital Converter (ADC), boasting up to a 2 Mile range using a wireless mesh networking architecture. It incorporates a 2 channel 10-bit ADC that samples analog inputs at user defined intervals and sends a wireless transmission to remote gateways and modems. After sampling, this device goes to sleep to minimize power consumption and prolong battery life. This IoT Wireless Analog to Digital Converter has an additional feature of detecting change in voltage every 7 seconds (user configurable) and sending out ADC samples if the change in voltage on any channel is greater than 10% (user configurable). To minimize power consumption, it sleeps during the time it is not checking for change in analog voltage. Both of these features work together, supporting multiple application areas in one package. This Wireless Analog to Digital Converter supports a dual inputs with voltage range between 0 and 3.3V DC.
Powered by just 2 AA batteries and an operational lifetime of 500,000 wireless transmissions, a 10 years battery life can be expected depending on environmental conditions and the data transmission interval. Optionally, this sensor may be externally powered.
The long range, price, accuracy, battery life and security features of Long Range IoT Wireless Analog to Digital Converter makes it an affordable choice which exceeds the requirements for most of the industrial as well as consumer market applications.
Note: The Board has Pull Up and Pull Down solder jumpers. These Jumpers can be changed based on user Requirement. For more Info Checkout Wiring Diagram In the Resources Section. By default “COM” is connected to 3.3V and ADC1 and ADC2 are pulled low. Jumper J2 can be used to change the “COM” voltage level and jumper J1 can be used to change the ADC pull up/down.
Transmission Interval
This device sends data periodically, based on user-preset timing intervals.
Digital Converter Sensor Applications
- Resistive Analog Sensor Interface
- Wireless Low Analog Voltage Monitoring
- Low Voltage Change Alarm Application
- Analog Transducer Interface
- Read Sensors Like Force, Strain Gauge, Pressure
- Analog Input To Cloud Like AWS and Azure
Full Node-RED Support
Use the power of Node-RED to quickly create complex logic flows and temperature alerts without a single line of code!
Mechanical Drawing
Wiring Diagrams
Essential
Examples
Documentation Downloads
Community Repositories
Enterprise 868 MHz Sensors
Enterprise 900MHz Sensors
Max Error Rate — =/-2%FS
Not for use in outdoor applications or for use in excessive temperature conditions. Prolonged freezing will prevent batteries from functioning until thawed, using extended temperature range industrial batteries may improve the useful temperature range. Extended freezing applications should use a full-time powered solution. Prolonged exposure to extreme humidity conditions may damage this device. The sensing element is rated for use for 5 years and may be replaced. Exposure to high temperatures may cause the batteries to leak, causing permanent damage to this device. NCD Warranty does not cover battery corrosion or use in excessively smoky environments under any circumstances.
900HP-S3B Wireless Compatibility Notes
Notice: Compatibility Notes Does NOT Apply to the Following Products:
- NCD Enterprise Solutions
- NCD Wireless Sensors
- NCD Enterprise Modems and Gateways
Notice: Compatibility Notes Applies to NCD Industrial Products, Including Fusion, ProXR, ProXR Lite, Taralist, and Reactor Series Products.
Compatibility Notes
When using an 900HP-S3B communication module, it is essential that you use the ZIGMO_PCB to configure the module settings. Long-Range wireless sensors may be programmed over the air without removing the communications module.
A 900HP-S3B Modem or a gateway of some kind that support the 900HP-S3B communications module will also be required.
Out of stock