IoT Long Range Wireless 0-24VDC Voltage Monitor
Please note that images above may contain product not included with purchase.
Highlights
- Industrial Grade 1 Channel 0-24VDC Analog to Digital Converter
- 10-bit Resolution with ±2 LSB Absolute Accuracy
- Auto ADC sample Transmission on Analog Voltage Change
- User-Defined 10% Analog Voltage Change Detection
- 2 Mile Line-of-Sight Range with On-Board Antenna
- Superior LOS Range of up to 28 Miles with High-Gain Antennas
- Interface to Raspberry Pi, Microsoft® Azure®, Arduino and More
- Example Software for Visual Studio and LabVIEW®
- Wireless Mesh Networking using DigiMesh®
- Open Communication Protocol for Easy Software Integration
- Small 3″ x 3″ Form Factor Wireless 0-24V ADC
- Power-Efficient Sleep Mode, Up to 10 Year Battery Life
- User Configurable Sleep duration
- Up to 500,000 Transmissions from 2 AA Batteries
- Includes Battery Level with Every Transmission
- Validates and Retries Lost Communication Packets
Retired Notice: This Sensor is Retired
This sensor is currently retired. We don’t recommend this product for new customers. Don’t worry though, we can still make it for you if it’s absolutely required, but minimum purchase quantities of 10 pieces will apply. We may need extra time to get this back into production, please click the “Help” Button in the lower right corner of the screen to contact us. We do have alternative sensors available. The extra batteries and extended battery life in the updated version has been a great benefit to our customers. Please see the updated product below:
Long Range IoT Wireless 0-24VDC Voltage Monitor
Introducing NCD’s Long Range IoT Wireless 0-24VDC Voltage Monitor with 10-Bit Analog to Digital Converter (ADC), boasting up to a 2 Mile range using a wireless mesh networking architecture. This voltage monitor incorporates a 1 channel ADC that samples analog inputs at user defined intervals and transmits voltage readings to local gateways and modems. This device enters a low-power sleep mode to minimize power consumption between transmissions. This Wireless 0-24VDC Voltage Monitor can measure up to 24V DC voltage input with the ability to detect a change in voltage every 7 seconds (user configurable) and sending out ADC samples if the change in voltage is greater than 10% (user configurable). To minimize power consumption, it sleeps between voltage samples. Both of these features work in parallel to support multiple application areas in one package.
Powered by just 2 AA batteries and an operational lifetime of 500,000 wireless transmissions, a 10 years battery life can be expected depending on environmental conditions and the data transmission interval. Optionally, this sensor may be externally powered.
The long range, price, accuracy, battery life and security features of Long Range IoT Wireless 0-24VDC Voltage Monitor makes it an affordable choice which exceeds the requirements for most of the industrial as well as consumer market applications.
Transmission Interval
This device sends data periodically, based on user-preset timing intervals.
This device sends data when a preset percentage of change is detected on the input.
IoT Wireless 0-24VDC Voltage Monitor Applications:
- Resistive Analog Sensor Interface
- Wireless 0-24VDC Voltage Monitoring
- Car, Solar, Boat and Marine Battery Health Monitoring
- Piezo Electric, Photo-resistor and Analog Output Sensor Interface
- Analog Transducer Interface
- Read Sensors Like Force, Strain Gauge, Pressure
- Analog Input to MQTT, AWS® and Azure® Cloud Services
Mechanical Drawing
Wiring Diagrams
Essential
Documentation Downloads
Community Repositories
Enterprise 868 MHz Sensors
Enterprise 900MHz Sensors
Max Error Rate — =/-2%FS
Not for use in outdoor applications or for use in excessive temperature conditions. Prolonged freezing will prevent batteries from functioning until thawed, using extended temperature range industrial batteries may improve the useful temperature range. Extended freezing applications should use a full-time powered solution. Prolonged exposure to extreme humidity conditions may damage this device. The sensing element is rated for use for 5 years and may be replaced. Exposure to high temperatures may cause the batteries to leak, causing permanent damage to this device. NCD Warranty does not cover battery corrosion or use in excessively smoky environments under any circumstances.
900HP-S3B Wireless Compatibility Notes
Notice: Compatibility Notes Does NOT Apply to the Following Products:
- NCD Enterprise Solutions
- NCD Wireless Sensors
- NCD Enterprise Modems and Gateways
Notice: Compatibility Notes Applies to NCD Industrial Products, Including Fusion, ProXR, ProXR Lite, Taralist, and Reactor Series Products.
Compatibility Notes
When using an 900HP-S3B communication module, it is essential that you use the ZIGMO_PCB to configure the module settings. Long-Range wireless sensors may be programmed over the air without removing the communications module.
A 900HP-S3B Modem or a gateway of some kind that support the 900HP-S3B communications module will also be required.
Out of stock