Shipping Delays due to Covid and Other NCD Notifications: PLEASE CLICK HERE. Dismiss

You are using an unsupported browser!

Please upgrade your version of IE to at least 9, or use a modern browser such as Chrome or Firefox.


  • Veris Hawkeye® H906 Current Sensor
  • Split Core Current Sensor with Contact Closure Output
  • Adjustable Trip Point for Contact Closure Output
  • Set Trip Point Detection Current up to 135 Amps with Flat Tip Screwdriver
  • Ideal for AC Over-current or Under-current Detection Applications
  • Compatible with MirC, MirX, MirM, and MirW Series Controllers
  • Compatible with ProXR, Fusion, or Reactor Series Controllers
  • Compatible with any Device with 0-5V Analog or Contact Closure Inputs



The Veris Hawkeye® H906 Split Core Current Sensor is capable of monitoring up to 135 Amps of AC Current.  This current sensor has a contact closure output of with a variable trip adjustment.  This allows the sensor to control the contact closure outputs based on the amount of current sensed.  This sensor is commonly used in over-current or under-current detection applications.  This sensor may also be used to validate the expected current draw of a high-power device.

The contact closure output of this sensor is perfect for use with NCD Fusion, Reactor, and ProXR AD8 Series relay controllers.  Fusion and Reactor series controllers may be configured to control relays based on the amount of current sensed.  This sensor may also work with any of our I2C or IoT devices with 0-5V analog inputs.  This sensor is a perfect companion with the entire Mirror series controllers (MirC, MirX, MirM, or MirW), allowing remote over-current or under-current detection with remote replication of the contact closure outputs.  This is a true industrial grade sensor designed for long life in harsh environments.

A typical AC installation will include Hot, Neutral, and Ground conductors.  The Hot conductor is the only conductor that should pass through the core of this sensor.  AC current monitoring is not possible when more than a single conductor is passed through the core.  For instance, passing all 3 wires through the sensor will cancel the AC current field, making current monitoring impossible.  Current sensors are offered in two varieties: Solid Core or Split Core.  Solid core current sensors require you to feed the wire through the core of the sensor.  Split core sensors open and allow you to clamp the sensor around the AC wire without having to disconnect the AC wire during installation.

Please Note: All current sensors have a minimum sensing current.  Exceeding the current rating of a current sensor may damage the sensor.  Not for use in DC current monitoring applications.  Only the AC hot or neutral wire should pass through this sensor, never attempt to pass more than a single wire through the core of this sensor.  Please review the datasheet carefully prior to purchase.  Hawkeye® is a registered trademark of Veris Industries.




Buy Now

Product Identification
SKU: H906
UPC: 689860057531
Country of Origin: US
HTS Code: 854231
1+ Pieces
10+ Pieces
25+ Pieces
100+ Pieces


We Customize Just for You!!

NCD offers many custom IoT electronic design services to help tailor our product to your exact needs.  Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.

Custom IoT Electronic Design Services Process

Most of our users purchase off-the-shelf hardware for initial testing.  Once everything is working, they contact us to build a custom solution which may include specialized changes to the board, firmware, connectors, etc.  Custom boards have many advantages such as reduced wiring, easy installation, small size, less power consumption, and in some cases, an overall reduction in product cost.  Custom IoT Electronic Design Services will have your company name and logo on the board as well as the enclosure.

Customized IoT Electronics

NCD engineers can help build a customized solution for your particular application based on the designs you see on our website.  We can combine devices onto a single board, change the shape, or even some of the components to meet your exact needs.  We also provide turn-key metal enclosures with powder coating and full-color printing on the top side starting at just $500 for setup!  We have more than 20 years of experience in electronics design and manufacturing.  All of our products are designed and manufactured in the USA, so we are here to support the products we make.  We only ask that our customers prototype their needs using our existing products before we customize.

Customization Guidelines

  • Custom designs should be based on our existing product because we can’t build rockets or electric cars over here!
  • We do not provide customization services if it involves the introduction of a new or untested technology.
  • Custom engineering fees depend on your requirements, so please contact us for a quote!
  • We maintain ownership of all designs, including our customized designs as they are based on our existing Design.
  • We will only ship the customized product to you or your authorized agents.
  • We have an NDA available if needed.
  • The turn-around time is about 2-3 weeks.
  • We specialize in low-volume designs, no quantity is too small!
  • We have the ability to scale to large volumes as needed.

Getting Started with Product Customization

All you have to do is contact us and we will walk you through the process from beginning to end, based on your individual needs.  Some people are surprised at how fast we finish CAD design (usually a few hours), but keep in mind, we still have to build your design, which takes considerably more time.  When we customize product, here are the general services we provide:

  • We design the circuit board.
  • We communicate with our customers throughout the customization and manufacturing process.
  • We manufacture surface mount stencils and circuit boards.
  • We program our pick and place machines to build your boards.
  • We build a working sample and run it through our wave solder machine.
  • We test your custom IoT solution.
  • Once the design is finalized it won’t be possible to make changes during production (changes cost money and require us to repeat the above processes)
  • Once it meets all your requirements, we will start production as needed.
  • We work with our metal fabricators to design a metal enclosure if required.
  • You work with our artist to print the top side of the enclosure in full color with your company logo if required.

+MORE App customizations

We partnered with Blynk who have developed the +MORE app.  If you are interested in customization to their +MORE app then we're sure you will enjoy working with them as much as we did.  They can customize the user interface +MORE mobile app at your request.

  • Add new functionality and features to the mobile applications and web dashboard
  • Change/ add data visualizations options

Contact them today for custom App Development!

White-labeled mobile apps and dashboard

Blynk the developer of +MORE has a fantastic team of developers eager to help with your IoT applications.  They offer the following services.

We provide white-label IoT infrastructure:

  • Private IoT cloud
  • Branded mobile applications for remote monitoring and control
  • A branded web dashboard to manage fleet of your devices
  • Big Data analysis with actionable insights
  • Development of machine learning algorithms

Contact them today for all of your IoT cloud needs!

©2021 National Control Devices, LLC

Made in the USA
5 Year Warranty
Free Shipping on orders over $100
Free Shipping on orders over $100

To learn something new, take the path that you took yesterday. ~John Burroughs

Log in with your credentials


Forgot your details?

Create Account